Surface Bonder Ultra

Hazard statements (CLP)

H317, H319, H334

Code

Statements

H317

May cause an allergic skin reaction

SECTION 2: Hazards identification

GHS Classification Classification of product or mixture Note to reader: This product in an untested mixture and GHS classification is based on the classification of the ingredients and their concentrations. Proprietary ingredients , if any, do NOT exhibit any health effects not listed in this SDS.

2.1 Classification of the substance or mixture

Eye irritation, Category 2A Respiratory sensitization, Category 1 Skin sensitization, Category 1B

Signal word

Danger

Hazard statements

H317: May cause an allergic skin reaction H319: Causes serious eye irritation H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled Integra Adhesives Inc. - 1 - Integra Adhesives Surface Bonder Ultra — Part A

Precautionary statements

P261: Avoid breathing dust/fume/gas/mist/spray. P264: Wash skin thoroughly after handling. P272: Contaminated work clothing should not be allowed out of the workplace. P280: Wear protective gloves/protective clothing/eye protection/face protection. P284: In case of inadequate ventilation wear respiratory equipment. P302+P352 IF ON SKIN Wash with plenty of soap and water P304+P340 IF INHALED Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P333+P313 If skin irritation or rash occurs Get medical advice/attention. P337+P313 If eye irritation persists Get medical advice/attention P342+P311 If experiencing respiratory symptoms Call a POISON CENTER or doctor/physician. P321: Specific treatment (see First Aid Section on the SDS) P362+P364: Take off contaminated clothing and wash it before reuse. P501: Dispose of contents/container to an approved waste disposal plant.

2.3 Other hazards

None 2.4

Principle Routes of Exposure

Skin Contact: Yes Skin Absorption: Yes Eye Contact: Yes Ingestion: No Inhalation: Yes Emergency Overview: May cause skin and/or respiratory sensitization. Effects of Short-Term (Acute) Exposure: Inhalation: Excessive exposure may cause severe irritation to the upper respiratory tract (nose and throat) and lungs. Decreased lung function has been associated with overexposure to isocyanates. Effects may be delayed. May cause allergic respiratory response. Re-exposure to extremely low isocyanate concentrations may cause allergic respiratory reactions in individuals already sensitized. Excessive exposure may aggravate pre-existing asthma and other respiratory disorders (e.g. emphysema, bronchitis, reactive airways dysfunction syndrome). Skin Contact: Brief contact may cause slight skin irritation with local redness. Prolonged contact may cause skin irritation with local redness, but is unlikely to result in absorption of harmful amounts. Vapor may cause skin irritation or drying and flaking of the skin. Hexamethylene diisocyanate is a potent skin sensitizer. Severe skin rash/allergic skin reactions have been noted in people exposed to aerosols/vapors of heated material. Animal studies have shown that skin contact with isocyanates may play a role in respiratory sensitization. Eye Contact: Eye contact with these products may cause severe eye irritation or corneal injury. Vapor or mist may cause eye irritation experienced as mild discomfort and redness. Ingestion: Very low toxicity if swallowed, but swallowing may cause gastrointestinal irritation, vomiting, and diarrhea. If swallowed, seek medical attention. Do not induce vomiting unless directed to do so by medical personnel. Integra Adhesives Inc. - 2 - Integra Adhesives Surface Bonder Ultra — Part A Effects of Long-Term (Chronic) Exposure: Long-term exposure may increase the risk of sensitization to this product.

Medical Conditions Generally Aggravated by Exposure

Pre-sensitization may increase the risk of a more severe allergic reaction.