Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-47-3
Name of the chemical
Chromium; chromic acid and its salts
Concentration
<=11
EC/CAS
7440-02-0
Name of the chemical
Nickel
Concentration
<=9.5
EC/CAS
7440-44-0
Name of the chemical
Carbon black
Concentration
<=5.5
EC/CAS
7440-50-8
Name of the chemical
Copper
Concentration
<=2.5
EC/CAS
7440-36-0
Name of the chemical
Antimony
Concentration
<=0.9
EC/CAS
7727-37-9
Name of the chemical
Nitrogen N2
Concentration
<=0.9
EC/CAS
7723-14-0
Name of the chemical
Phosphorus
Concentration
<=0.9
EC/CAS
7782-49-2
Name of the chemical
Selenium
Concentration
<=0.9
EC/CAS
13494-80-9
Name of the chemical
Tellurium
Concentration
<=0.5
General Information
Revision date
2018-08-28
Product name
Carbon and Alloy Steels
Product Synonyms
Bar, Sheet, Plate, Tubing, Pipe, Structurals
1.2.1 Relevant identified uses
Solid Product, Various Forms and Uses
Emergency telephone
Transportation) (800) 424-9300 CANUTEC (Canadian Transportation) (613) 996-6666
Icons in SDS
Company Information
company name
Central Steel & Wire
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317, H351, H360
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
Classification (GHS-US)
Skin Sens. 1 H317 Carc. 2 H351 Repr. 1B H360
Hazard statements
see Section 16 : H317 - May cause an allergic skin reaction. H351 - Suspected of causing cancer. H360 - May damage fertility or the unborn child.
2.2 Label elements
GHS-US/CA Labeling
Hazard pictograms
GHS07 GHS08
Signal word
Danger
Precautionary statements
P201 - Obtain special instructions before use P202 - Do not handle until all safety precautions have been read and understood. P261 - Avoid breathing fume, dust. P272 - Contaminated work clothing should not be allowed out of the workplace. P280 - Wear protective gloves, protective clothing, and eye protection. P302+P352 - IF ON SKIN: Wash with plenty of water. P308+P313 - If exposed or concerned: Get medical advice/attention. P321 - Specific treatment (see Section 4 on this SDS). P333+P313 - If skin irritation or rash occurs: Get medical advice/attention. P362+P364 - Take off contaminated clothing and wash it before reuse. P405 - Store locked up. P501 - Dispose of contents/container in accordance with local, regional, national, territorial, provincial, and international regulations.
2.3 Other hazards
This product as shipped is physiologically inert in its solid form. However, user-generated dust and/or fumes may pose a physiological hazard if inhaled or ingested. Avoid inhalation of metal dusts and fumes. May cause an influenza-like illness. Avoid skin and eye contact with dusts to prevent mechanical irritation. User-generated dust is easily ignited and difficult to extinguish. The below listing is a summary of elements used in carbon and alloy steels. Various grades will contain different combinations of these elements. Other trace elements may also be present in minute amounts. These small quantities (less than 0.1%) are frequently referred to as “trace” or “residual” elements; generally they originate in the raw material used. Such elements would include arsenic (As), beryllium (Be), cobalt (Co), lead (Pb), mercury (Hg) less than 0.01%, oil mist (mineral1), oxygen (O), selenium (Se), tellurium (Te), and zirconium (Zr). Various byproducts of processing from these trace elements may include lead chromate, ozone, polybrominated biphenyls (PBB), and polybrominated diphenyl ether (PBDE), cadmium (Cd) less than 0.01%, and these byproducts may also be considered trace. If listed in the above table, the ingredient is considered to be a component rather than trace. *Carbon and alloy steel products as provided contain chromium metal in the zero valence state. As such, chromium metal does not present any unusual health hazard. However, welding, torch cutting, brazing, or grinding of chromium metal in carbon and alloy steel may generate airborne concentrations of hexavalent chromium.
Ingredient(s) with unknown acute toxicity
No data available
