Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-66-6
Name of the chemical
Zinc ()
Concentration
N/A
EC/CAS
7440-47-3
Name of the chemical
Chromium‡
Concentration
N/A
General Information
Revision date
2009-01-06
Product name
ALUMINUM EXTRUSIONS, ANODIZED ALUMINUM PRODUCTS
1.2.1 Relevant identified uses
Fabricated aluminum parts and products Synonym(s) Aluminum Alloys 6xxx Series
Icons in SDS
Company Information
company name
Central Aluminum Company, LLC
Section 2
SECTION 2: Hazards identification
Emergency overview Solid. Silver colored. Odorless. Non-combustible as supplied. Small chips, fine turnings and dust from processing may be readily ignitable. Explosion/fire hazards may be present when (See Sections 5, 7 and 10 for additional information): • Dust or fines are dispersed in air. • Chips, fines or dust are in contact with water. • Dust and fines are in contact with certain metal oxides (e.g., rust, copper oxide). • Molten metal is in contact with water/moisture or certain metal oxides (e.g., rust, copper oxide). Dust and fumes from processing: Can cause irritation of the eyes, skin and respiratory tract and metal fume fever.
Potential health effects
The following statements summarize the health effects generally expected in cases of overexposures. User specific situations should be assessed by a qualified individual. Additional health information can be found in Section 11. The listed below are not likely to occur unless processing of this product generates dusts or fumes Eyes Dust and fumes from processing: Can cause irritation. Skin Dust and fumes from processing: Can cause irritation. Inhalation Dust and fumes from processing: Can cause irritation of upper respiratory tract. Health effects from mechanical processing (e.g., cutting, grinding) Chronic overexposures Can cause scarring of the lungs (pulmonary fibrosis), secondary Parkinson's disease and reproductive harm in males. Additional health effects from elevated temperature processing (e.g., welding, melting) Acute overexposures Can cause metal fume fever (nausea, fever, chills, shortness of breath and malaise), reduced ability of the blood to carry oxygen (methemaglobin) and the accumulation of fluid in the lungs (pulmonary edema). Chronic overexposures: Can cause respiratory sensitization, scarring of the lungs (pulmonary fibrosis) and lung cancer. Carcinogenicity and Reproductive Hazard Product as shipped: Does not present any cancer or reproductive hazards. Dust and fumes from mechanical processing: Does not present any cancer hazards. Can present a reproductive hazard for males (Manganese). Dust and fumes from welding or elevated temperature processing: Can present a cancer hazard (Hexavalent chromium compounds, Welding fumes). Can present a reproductive hazard (Manganese). Dross Handling Small amounts of beryllium (<0.0002% or <2 ppm) can be present in aluminum alloys either from naturally occurring beryllium in aluminum ore or as a alloying element in the aluminum recycling stream. This beryllium does not present an health hazard during processing (grinding, cutting or welding) of aluminum products. However, beryllium may concentrate in the dross formed when aluminum scrap is remelted. Therefore, the potential for exposures to beryllium when handling dross must be considered. Control of airborne dust levels would be critical in reducing or eliminating this potential.
Medical Conditions Generally Aggravated by Exposure
to product Dust or fume from processing: Asthma, chronic lung disease, Secondary Parkinson's disease and skin rashes.