Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-50-8
Name of the chemical
Copper
Concentration
N/A
EC/CAS
7440-47-3
Name of the chemical
Chromium; chromic acid and its salts
Concentration
N/A
EC/CAS
7440-67-7
Name of the chemical
Zirconium and its compounds, with the exception of the substances listed under reference number 50 in Annex III, and the zirconium lakes, pigments or salts of the colouring agents when listed in Annex IV
Concentration
N/A
EC/CAS
7439-92-1
Name of the chemical
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentration
N/A
EC/CAS
231-159-6
Name of the chemical
Copper (nano) [INCI] (11), Colloidal Copper (nano) [INCI] (11)
Concentration
N/A
EC/CAS
231-157-5
Name of the chemical
Chromium; chromic acid and its salts
Concentration
N/A
EC/CAS
231-176-9
Name of the chemical
Zirconium and its compounds, with the exception of the substances listed under reference number 50 in Annex III, and the zirconium lakes, pigments or salts of the colouring agents when listed in Annex IV
Concentration
N/A
EC/CAS
231-100-4
Name of the chemical
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentration
N/A
General Information
Revision date
2021-05-03
Product name
CenterLine RWMA Class 2 Copper Resistance Welding Electrodes
Product Synonyms
• Electrodes, adapters and holders used for resistance welding, which contain chromium, including: C18150 (CuCrZr) and C18200 (CuCr) alloys
1.2.1 Relevant identified uses
Electrodes and associated components are generally used without modification to perform one of
Manufacturer Name
CenterLine (Windsor) Ltd
Icons in SDS
Company Information
company name
CenterLine (Windsor) Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
info@cntrline.com
Section 2
SECTION 2: Hazards identification
During normal operation and usage, this non-combustible, non-reactive, solid material article does not present inhalation, ingestion, or chemical hazards. Electrodes that this SDS concerns will require periodic maintenance or replacement, during which exposure to adhered hazardous contamination is possible. When this article is machined or otherwise modified by the user, dusts or fumes may be created, which may be potentially hazardous if the exposure limits described in Section 3 are exceeded. Lead and hexavalent chromium, which may be present in fume, are classed as carcinogens.
