Hardened Concrete (dry)

SECTION 2: Hazards identification

OSHA Hazards As packaged, this material does not present significant health hazards. The hazards below apply to the product if aerosols or dusts are generated from cutting, grinding, or pulverizing.

Hazard pictograms

GHS05 GHS07 GHS08

Signal word

Danger

Hazard statements

Causes severe skin burns and eye damage May cause an allergic skin reaction Causes serious eye damage May cause respiratory irritation May cause cancer (Dermal, Inhalation) May cause damage to organs (eye, lung/respiratory system, Skin) through prolonged or repeated exposure (Dermal, Inhalation)

Precautionary statements

Obtain special instructions before use Do not handle until all safety precautions have been read and understood Do not breathe dust, spray, mist, fume Avoid breathing dust, spray, mist, fume Wash clothing, hands, forearms and face thoroughly after handling Use only outdoors or in a well-ventilated area Contaminated work clothing must not be allowed out of the workplace Wear eye protection, protective clothing, protective gloves If swallowed: rinse mouth. Do NOT induce vomiting If on skin: Wash with plenty of soap and water If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower If inhaled: Remove person to fresh air and keep comfortable for breathing If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing If exposed or concerned: Get medical advice/attention Immediately call a POISON CENTER Call a poison center if you feel unwell Get medical advice/attention if you feel unwell Specific treatment (see Section 4 on this label) If skin irritation or rash occurs: Get medical advice/attention Take off contaminated clothing and wash it before reuse Wash contaminated clothing before reuse Store in a well-ventilated place. Keep container tightly closed Dispose of contents/container to comply with local/regional/national regulations

2.3 Other hazards

Trace amounts of naturally occurring chemicals might be detected during chemical analysis. Trace constituents may include insoluble residue, some of which may be free Quartz (crystalline silica), calcium oxide (Also known as lime or quick lime), magnesium oxide, potassium sulfate, sodium sulfate, chromium compounds, and nickel compounds.

2.1 Classification of the substance or mixture

SKIN CORROSION/IRRITATION - Category 1 EYE DAMAGE - Category 1 SKIN SENSITIZATION - Category 1 CARCINOGENICITY/INHALATION - Category 1 SINGLE TARGET ORGAN TOXICITY (SINGLE EXPOSURE) - Category 3 SINGLE TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 2