Note: Ingredients listed on restricted chemical lists
EC/CAS
231-111-4/7440-02-0
Name of the chemical
Nickel
Concentration
>50%
General Information
Version
5,0
Revision date
2018-07-05
Product name
ProXon 21021
1.2.1 Relevant identified uses
Thermal spraying
Emergency telephone
+49 (0) 6132 / 84463
Icons in SDS
Company Information
company name
Castolin Eutectic Ireland Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
sds@gbk-ingelheim.de
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317, H351, H372, H412
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
Classification according to Regulation (EC) No. 1272/2008 [CLP Classification of the substance or mixture
Hazard categories
Respiratory or skin sensitisation: Skin Sens. 1 Carcinogenicity: Carc. 2 Specific target organ toxicity - repeated exposure: STOT RE 1 Hazardous to the aquatic environment: Aquatic Chronic 3 Hazard Statements May cause an allergic skin reaction Suspected of causing cancer Causes damage to organs through prolonged or repeated exposure Harmful to aquatic life with long lasting effects
Signal word
Danger
Hazard pictograms
GHS07-GHS08
Hazardous Ingredients
nickel powder
Hazard statements
H317 May cause an allergic skin reaction. H351 Suspected of causing cancer. H372 Causes damage to organs through prolonged or repeated exposure. H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
P285 In case of inadequate ventilation wear respiratory protection. P314 Get medical advice/attention if you feel unwell. P280 Wear protective gloves/protective clothing/eye protection/face protection. P202 Do not handle until all safety precautions have been read and understood. P260 Do not breathe dust/fume/gas/mist/vapours/spray. P501 Dispose of contents/container to waste treatment facility in accordance with local and national regulations. .
2.3 Other hazards
Welding and brazing processes can cause spatter, melting metal and UV/IR heat can cause burns or start fires. IARC and NIOSH are of the following opinion: During welding- and brazing processes formed metallic fumes are suspected of being cancer causing agents. Brazing/welding vapours and fumes from brazing/welding may cause metal fumes fever. Symptoms can appear 4 to 12 hours after. (headache, dizziness, dryness, cough, nausea and fever) May cause irritation by prolonged inhalation of brazing/welding fumes. Welding fumes (not otherwise specified) are considered to be carcinogenic with no further categorization by NIOSH (National Institute for Occupational Safety and Health) and IARC (International Agency for the Research on Cancer). IARC - International Agency for Research on Cancer NIOSH - National Institute for Occupational Safety and Health
2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP] Hazard categories: Respiratory or skin sensitisation: Skin Sens. 1 Carcinogenicity: Carc. 2 Specific target organ toxicity - repeated exposure: STOT RE 1 Hazardous to the aquatic environment: Aquatic Chronic 3 Hazard Statements: May cause an allergic skin reaction. Suspected of causing cancer. Causes damage to organs through prolonged or repeated exposure. Harmful to aquatic life with long lasting effects.