Note: Ingredients listed on restricted chemical lists
EC/CAS
204-881-4/128-37-0
Name of the chemical
2,6-di-tert-butyl-p-cresol
Concentration
0≤x<0,5
General Information
Revision date
2017-09-03
Product name
POLICARVER/10
Chemical name
Alkyd resin solution in aliphatic solvent
1.2.1 Relevant identified uses
Single-component paint product
Emergency telephone
DUBLIN
Icons in SDS
Company Information
company name
CARVER S.r.l Unipersonale
e-mail address of the competent person responsible for the Safety Data Sheet
sds@carver.it
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H226, H336
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
2.1 Classification of the substance or mixture
The product is classified as hazardous pursuant to the provisions set forth in EC Regulation 1272/2008 (CLP) (and subsequent amendments and supplements). The product thus requires a safety datasheet that complies with the provisions of EC Regulation 1907/2006 and subsequent amendments. Any additional information concerning the risks for health and/or the environment are given in sections 11 and 12 of this sheet. Hazard classification and indication: Flammable liquid, category 3 H226 Flammable liquid and vapour. Specific target organ toxicity - single exposure, category H336 May cause drowsiness or dizziness. 3
2.2 Label elements
Hazard labelling pursuant to EC Regulation 1272/2008 (CLP) and subsequent amendments and supplements.
Signal word
Warning
Hazard statements
H226 Flammable liquid and vapour. H336 May cause drowsiness or dizziness. ... / >> EUH066 Repeated exposure may cause skin dryness or cracking.
Precautionary statements
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233 Keep container tightly closed. P280 Wear protective gloves / eye protection / face protection. P304+P340 IF INHALED: remove person to fresh air and keep comfortable for breathing.
Contains
Hydrocarbons C9-C11 1-METHOXY-2-PROPANOL VOC (Directive 2004/42/EC) : One-pack performance coatings. VOC given in g/litre of product in a ready-to-use condition : Limit value: 500,00 (2010) VOC of product : 485,00
2.3 Other hazards
On the basis of available data, the product does not contain any PBT or vPvB in percentage greater than 0,1%. READ INSTRUCTIONS BEFORE USE. DANGER OF COMBUSTION. Rags and other porous materials soaked with this product could generate self-combustion phenomena, even delayed in time, due to self-oxidation: all contaminated materials must be immersed in water and kept in an airtight metal container.
