Note: Ingredients listed on restricted chemical lists
EC/CAS
26447-40-5
Name of the chemical
Methylenediphenyl diisocyanate (see also specific isomers)
Concentration
<10
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
N/A
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
<55
General Information
Revision date
2017-07-06
Product name
310476
1.2.1 Relevant identified uses
Two-component polyurethane system
Emergency telephone
+1-800-424-9300
Icons in SDS
Company Information
company name
Carlisle SynTec Systems
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
Signal word
Danger
Hazard statements
May be harmful if inhaled, and may cause allergy or asthma symptoms, breathing difficulties, and/or respiratory irritation. May cause an allergic skin reaction. May cause skin irritation and serious eye irritation. May cause damage to the respiratory system and/or skin through prolonged or repeated exposure.
Precautionary statements
Do not breathe mist, spray, or vapors. Use only outdoors or in a well-ventilated area. In case of inadequate ventilation wear proper respiratory protection. Wear protective gloves and eye/face protection. Wash hands and forearms thoroughly after handling. Get medical advice/attention if you feel unwell. IF INHALED: If breathing is difficult, remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms or if you feel unwell, call a doctor or Poison Control Center. IF ON SKIN: Wash with plenty of water. Take off contaminated clothing and wash before reuse. Contaminated work clothing must not be allowed out of the workplace. If skin irritation or rash occurs, get medical advice/attention. IF IN EYES: Rinse cautiously with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention. Store locked up in a well-ventilated place. Keep container tightly closed. Dispose of contents/container in accordance with applicable regulations. The acute toxicities of <10% of the product’s ingredients are unknown. Emergency overview Overexposure to components of this product by inhalation may cause respiratory irritation, asthma-like symptoms, and/or respiratory sensitization. The supplier has conducted an exposure assessment under
2.1 Classification of the substance or mixture
Acute Toxicity, Inhalation – Category 4 Respiratory Sensitization – Category 1 Skin Sensitization – Category 1 Skin Irritation – Category 2 Eye Irritation – Category 2A Specific Target Organ Toxicity, Single Exposure – Category 3 Specific Target Organ Toxicity, Repeated Exposure – Category 2
