Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
30-60%
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
30-60%
EC/CAS
5873-54-1
Name of the chemical
2,4’-Methylenediphenyl diisocyanate
Concentration
10-13%
General Information
Version
5
Revision date
2018-10-03
Product name
LiquiSeal Metal Primer
Product Synonyms
Interior and Exterior Waterproofing
Chemical name
Isocyanate
1.2.1 Relevant identified uses
Interior and exterior waterproofing
Emergency telephone
+1-800-424-9300
Icons in SDS
Company Information
company name
Carlisle SynTec
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H320, H332, H334, H335
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
NFPA Rating Classification in accordance with paragraph (d) of
Additional information
At temperatures up to 77ºF (25ºC), this product does not emit sufficient vapors to pose a respiratory hazard when used as directed. Above this temperature, concentrations may become hazardous in enclosed spaces. Ventilation using open windows, fans, or other means of creating airflow are typically sufficient engineering controls to maintain adequate ventilation at working temperatures.
2.2 Label elements
This product is classified and labeled according to the Globally Harmonized System (GHS).
Signal word
Danger
Hazardous Ingredients
diphenylmethanediisocyanate,isomeres and homologues 4,4'-methylenediphenyl diisocyanate o-(p-isocyanatobenzyl)phenyl isocyanate
Hazard statements
Harmful if inhaled. Causes skin and eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. May cause respiratory irritation.
Precautionary statements
In case of inadequate ventilation wear respiratory protection. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/protective clothing/eye protection/face protection. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Specific treatment (see on this label). IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. IF ON SKIN: Wash with plenty of soap and water. IF INHALED: Call a POISON CENTER/doctor if you feel unwell. If experiencing respiratory symptoms: Call a POISON CENTER/doctor. Take off contaminated clothing and wash it before reuse. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents/container in accordance with local/regional/national/international regulations. WHMIS-symbols: D2A – Very toxic material causing other toxic effects NFPA ratings (scale 0 - 4): 1 Health = 2 2 1 Fire = 1 Reactivity = 1 0
