Note: Ingredients listed on restricted chemical lists
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
N/A
EC/CAS
811-97-2
Name of the chemical
1,1,1,2-Tetrafluoroethane
Concentration
N/A
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
N/A
EC/CAS
26447-40-5
Name of the chemical
Methylenediphenyl diisocyanate (see also specific isomers)
Concentration
N/A
General Information
Revision date
2019-11-18
Product name
328043
Product Synonyms
Low Pressure Polyurethane foam adhesive
1.2.1 Relevant identified uses
For industrial use only
Icons in SDS
Company Information
company name
Carlisle SynTec
GHS Information
Signal word
Danger
Section 2
Product definition
Mixture
2.1 Classification of the substance or mixture
Gases Under Pressure- Compressed Gas Skin Irritation- Category 2 Skin Sensitization- Category 1B Eye Irritation- Category 2B Acute Toxicity Inhalation- Category 4 Respiratory Sensitizing- Category 1 Specific Target Organ Toxicity, Single Exposure -Category 3 (STOT SE 3) Carcinogen- Category 2 Specific Target Organ Toxicity, Repeated Exposure- Category 2 (STOT RE 2) Simple Asphyxiant
Signal word
Danger.
Hazard statements
Contains gas under pressure; may explode if heated. Causes skin irritation. May cause an allergic skin reaction. Causes eye irritation. Harmful if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. Suspected of causing cancer. May cause damage to organs through prolonged or repeated exposure. May displace oxygen and cause rapid suffocation.
Prevention
Keep Out of Reach of Children. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Pressurized container: Do not pierce or burn, even after use. Avoid breathing vapor, mist or spray. Wash hands and other skin areas exposed to material thoroughly after handling. Use outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves, protective clothing and eye protection. In case of inadequate ventilation, wear respiratory protection.
Response
IF ON SKIN Wash with plenty of soap and water. If skin irritation or rash occurs Get medical attention IF INHALED: if breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Get medical advice. Get medical attention if you feel unwell. If eye irritation persists: Get medical attention. If experiencing respiratory symptoms: Call a POISON CENTER or doctor. Take off contaminated clothing and wash before reuse.
Storage
Store in a well-ventilated place. Protect from light. Store locked up. Keep container tightly closed.
Precautionary statements
Disposal) Dispose of contents and container in accordance with applicable local, regional, national, and international regulations.
2.3 Other hazards
No specific dangers known, if the regulations/notes for storage and handling are considered. Special Information: Contains isocyanates. Inhalation of isocyanate mists or vapors may cause respiratory irritation, breathlessness, chest discomfort and reduced pulmonary function. Overexposure well above the PEL may result in bronchitis, bronchial spasms and pulmonary edema. Long-term exposure to isocyanates has been reported to cause lung damage, including reduced lung function which may be permanent. Acute or chronic overexposure to isocyanates may cause sensitization in some individuals, resulting in allergic respiratory reactions including wheezing, shortness of breath and difficulty breathing. Animal tests indicate that skin contact may play a role in causing respiratory sensitization.