Note: Ingredients listed on restricted chemical lists
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
10-30%
EC/CAS
26447-40-5
Name of the chemical
Methylenediphenyl diisocyanate (see also specific isomers)
Concentration
<1%
General Information
Revision date
2023-08-12
Product name
Polyurethane Construction Adhesive
1.2.1 Relevant identified uses
Adhesive
supplier name
Capital Cutters (A C Bilham Ltd)
Icons in SDS
Company Information
company name
Capital Cutters (A C Bilham Ltd)
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H303, H315, H317, H319, H334, H372
Hazard statements
Code
Statements
H303
May be harmful if swallowed
Section 2
SECTION 2: Hazards identification
ERMA Approval: HSR002670 Not classified as Dangerous Goods by NZS 5433 Transport of Dangerous Goods on Land. Classified as hazardous according to criteria in the HS (Minimum Degrees of Hazard) Regulations 2017. Danger: Toxic to human target organs or systems. Warning: Reacts slowly with water to produce carbon dioxide but reaction accelerate at higher temperatures. Toxic gases/fumes maybe given off during burning or thermal composition. Closed container may forcibly rupture under extreme heat or when contents have been contaminated with water. Use cold water spray to cool fire-exposed containers to minimize the risk of rupture. 6.1E(Oral); 6.3A; 6.4A; 6.5A(Respiration); 6.5B(Contact); 6.9A(Inhalation) Product: Polyurethane Construction Adhesive Version 1.1 1
Hazard statements
H303: May be harmful if swallowed. H315: Causes skin irritation. H317: May cause an allergic skin reaction. H319: Causes serious eye irritation. H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled. H372: Causes damage to organs through prolonged or repeated exposure.
Prevention
P102: Keep out of reach of children. P103: Read label before use. P260: Do not breathe fumes/mist/vapours/dust/spray. P261: Avoid breathing dust/fume/gas/mist/vapours/spray. P264: Wash thoroughly after handling. P270: Do not eat, drink or smoke when using this product. P271: Use only outdoors or in a well-ventilated area. P272: Contaminated work clothing should not be allowed out of the workplace. P280: Wear protective gloves/protective clothing/eye protection/face protection. P285: In case of inadequate ventilation wear suitable respiratory protection.
Response
P101: If medical advice is needed, have product container or label at hand. P302+P352 IF ON SKIN Wash with plenty of soap and water P304+P341 IF INHALED If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P307+P311 IF exposed Call a POISON CENTER or doctor/physician P312: Call a POISON CENTER or doctor/physician if you feel unwell. P314: Get medical advice/attention if you feel unwell. P333+P313 If skin irritation or rash occurs Get medical advice/attention P337+P313 If eye irritation persists Get medical advice/attention P342+P311 If experiencing respiratory symptoms Call a POISON CENTRE or doctor/physician P362: Take off contaminated clothing and wash before re-use. P363: Wash contaminated clothing before reuse.
Storage
P403+P235 Store in a well-ventilated place. Keep cool.
Disposal
P501: Do not let product enter the environment. Do not dispose of in waterways or sewers. Unwanted product should be brushed out on newspaper, allowed to cure, and then disposed of via domestic waste collection. Empty containers should be left open in a well-ventilated area to Product: Polyurethane Construction Adhesive Version 1.1 2 cure. When cured, recycle the container via recycling programs. Disposal of empty containers via domestic recycling programs may differ between local authorities. Check with your local council first.