WM-8082 ANODE

Hazard statements (CLP)

H314, H318, H350, H371, H373

Code

Statements

H314

Causes severe skin burns and eye damage

SECTION 2: Hazards identification

NFPA Rating Classification of the substance or mixture d ~ GHS08 Health hazard Carcinogenicity 1A H350 May cause cancer. Route of exposure Inhalation Specific target organ toxicity (single exposure) 2 H371 May cause damage to organs Specific target organ toxicity (repeated exposure) 2H373 May cause damage to the lung through prolonged or repeated exposure. Route of exposure: Inhalation d ~ GHS05 Corrosion Skin corrosion 1C H314 Causes severe skin burns and eye damage Eye damage 1 H318 Causes serious eye damage Additional information Users should be informed of the potential presence of respirable dust and respirable crystalline silica as well as their potential hazards. Overexposure to the respirable dust of crystalline silica quartz or cristobalite, less than or equal to 5 microns in size) may lead to silicosis in humans, which is a progressive and irreversible lung disease. Appropriate training in the proper use and handling of this material should be provided as required under applicable regulations

2.2 Label elements

The product is classified and labeled according to the Globally Harmonized System (GHS). (Contd. on page 2) US (Contd. of page 1)

Hazard pictograms

d ~ d ~ GHS05 GHS08

Signal word

Danger

Hazardous Ingredients

Calcium oxide Quartz (SiO2) diiron trioxide

Hazard statements

H314 Causes severe skin burns and eye damage. H350 May cause cancer. Route of exposure: Inhalation. H371 May cause damage to organs. H373 May cause damage to the lung through prolonged or repeated exposure. Route of exposure: Inhalation.

Precautionary statements

P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P260 Do not breathe dusts or mists. P264 Wash thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection. P301+P330+P331 If swallowed: Rinse mouth. Do NOT induce vomiting. P303+P361+P353 If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P304+P340 If inhaled: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a poison center/doctor. P308+P313 IF exposed or concerned: Get medical advice/attention. P321 Specific treatment (see on this label). P314 Get medical advice/attention if you feel unwell. P363 Wash contaminated clothing before reuse. P405 Store locked up. P501 Dispose of contents/container in accordance with local/regional/national/ international regulations. · Information pertaining to particular dangers for man and environment

Classification system

· NFPA ratings (scale 0 - 4) Health = 3 0 Fire = 0 3 0 Reactivity = 0 · HMIS-ratings (scale 0 - 4) HEALTH *3 Health = *3 FIRE 0 Fire = 0 REACTIVITY 0 Reactivity = 0

PBT Substances

Not applicable

vPvB Substances

Not applicable (Contd. on page 3) US (Contd. of page 2)

2.3 Other hazards

There are no adverse physical or health effects known that are not covered by the hazard classes of the Hazard Communications Standard.

2.1 Classification of the substance or mixture

d ~ GHS08 Health hazard Carcinogenicity 1A H350 May cause cancer. Route of exposure: Inhalation. Specific target organ toxicity (single exposure) 2 H371 May cause damage to organs. Specific target organ toxicity (repeated exposure) 2H373 May cause damage to the lung through prolonged or repeated exposure. Route of exposure: Inhalation. d ~ GHS05 Corrosion Skin corrosion 1C H314 Causes severe skin burns and eye damage. Eye damage 1 H318 Causes serious eye damage. · Additional information: Users should be informed of the potential presence of respirable dust and respirable crystalline silica as well as their potential hazards. Overexposure to the respirable dust of crystalline silica (quartz or cristobalite, less than or equal to 5 microns in size) may lead to silicosis in humans, which is a progressive and irreversible lung disease. Appropriate training in the proper use and handling of this material should be provided as required under applicable regulations.