Note: Ingredients listed on restricted chemical lists
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
10-30%
EC/CAS
37244-96-5
Name of the chemical
nepheline syenite
Concentration
0-20%
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
0-6%
General Information
Revision date
2025-01-21
Product name
PORCELAIN TILES manufactured by Caesar Ceramics USA Inc
1.2.1 Relevant identified uses
the article
1.2.2. Uses advised against
During installation, wet cutting or the score-and-snap method is strongly recommended. Improper installation techniques could expose installers to inhalation of harmful silica dust (SiO2). Do not dry cut using power tools during the installation process. Using dry cutting methods could present a risk of acute lung injury. If adequate ventilation cannot be achieved, wear a mask or respirator
Emergency telephone
+1 (615) 986 1500
Icons in SDS
Company Information
company name
Caesar Ceramics USA Inc
e-mail address of the competent person responsible for the Safety Data Sheet
hse@caesar.it
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H319, H335, H350
Hazard statements
Code
Statements
H319
Causes serious eye irritation
H335
May cause respiratory irritation
H350
May cause cancer
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture There is no proof or indication that the whole, finished product [definable as an “article” according to both 29 CFR
2.2 Label elements
Not applicable to intact tiles. We recommend wet cutting or the score and snap method during the installation process. Improper installation techniques could expose installer to inhalation of harmful silica dust (SiO2). Do not dry cut using power tools during the installation process. Using dry cutting methods could present a risk of acute lung injury. If adequate ventilation cannot be achieved, wear a mask or respirator. (Contd. on page 2) US (Contd. of page 1)
Hazard pictograms
GHS07 GHS08
Signal word
Danger
Hazardous Ingredients
Quartz (SiO2) Feldspar
Hazard statements
Causes serious eye irritation. May cause cancer. May cause respiratory irritation.
2.3 Other hazards
If the product is dry cut/sanded or altered in such a way that excessive and/or significant particulates and/or dusts may be generated, exposure may aggravate pre-existing eye, skin, or respiratory conditions. We recommend wet cutting or the score and snap method during the installation process. Do not dry cut using power tools during the installation process. Improper installation techniques could expose installer to harmful silica dust. Contains crystalline silica (quartz). When exposed to high temperatures, free quartz can change crystal structure to form tridymite (above 870°C.) or cristobalite (above 1470°C.) which have greater health hazards than quartz due to their more fibrogenic characteristics. Manufacturers who crush, grind or cut ceramic bodies fired to high temperatures should recognize the possible presence of tridymite and/or cristobalite. Tiles and boxes, if not grasped or handled correctly, can accidentally fall causing crushing of both hands and feet.
PBT Substances
Not applicable
vPvB Substances
Not applicable
2.1 Classification of the substance or mixture
There is no proof or indication that the whole, finished product [definable as an “article” according to both 29 CFR 1910.1200 (Hazard Communication Standard)] has any risks according to Globally Harmonized System (GHS). In the case of the breakage of the article or its processing, involving cutting, shaping, engraving or any other process which could lead to the release of dust traceable to the matrix of the article, it may generate crystalline silica powder (SiO2) in the form of quartz . The hazard assessment refers to this specific case. No acute or chronic effects are known from exposure to intact tiles. Please see Section 3 for the crystalline silica content of the whole finished product. Eye irritation 2A H319 Causes serious eye irritation. Carcinogenicity 1A H350 May cause cancer. Specific target organ toxicity (single exposure) 3 H335 May cause respiratory irritation. · Additional information: The breathable fraction of crystalline silica (SiO2), particularly during prolonged exposures and/or exposures to high concentrations, may lead to lung damage or illnesses, such as silicosis.