Note: Ingredients listed on restricted chemical lists
EC/CAS
231-141-8/7440-31-5
Name of the chemical
Tin
Concentration
95.5-99.3
EC/CAS
231-131-3/7440-22-4
Name of the chemical
Silver
Concentration
0-3.8
EC/CAS
231-159-6/7440-50-8
Name of the chemical
Copper
Concentration
0-3
EC/CAS
232-475-7/8050-09-7
Name of the chemical
Rosin
Concentration
N/A
General Information
Revision date
2015-09-11
Product name
COMPOSITION
1.2.1 Relevant identified uses
For manual and automated wave and dip soldering. Surface mount components of the electronics industry assembly
1.2.2. Uses advised against
Do not use for other purposes other than those described in the product
Emergency telephone
93.640.19.00
Icons in SDS
Company Information
company name
BROQUETAS S.L
e-mail address of the competent person responsible for the Safety Data Sheet
broquetas@broquetas.es, broquetas@broquetas.com
GHS Information
Signal word
Warning
Section 2
SECTION 2: Hazards identification
According to Regulation (EC) No 1272/2008 [CLP]
2.1 Classification of the substance or mixture
REGULATION (EC) No 1272/2008 (CLP) Hazard category/class Hazard(s) statement This mixture is not classified as hazardous according to Regulation (EC) No 1272/2008 (CLP).* * This product is composed of an alloy of tin and lead with a resin flux inside. In section 3 is indicated that the resin is classified as Skin Sens. 1, but because the resin is coated by metal alloy and the contact with it is not possible, this substance is not taken into account in mixture classification.
2.2 Label elements
REGULATION (CE) No 1272/2008 [CLP] Pictograph and signal word Not applicable. This mixture is not classified as hazardous according to Regulation (EC) No1272/2008 (CLP).
2.3 Other hazards
Compliance with PBT/vPvB criteria: Not classified as PBT or vPvB. Other hazards not identified in the classification: Due to the high temperatures reached when working with this product, burns caused by molten material may occur. It can be harmful and produce health damage by inhalation of vapours emitted during the welding process. It should be used in ventilated areas.
