Qju Adhesive Foam 3700

Hazard statements (CLP)

H222, H229, H315, H317, H319, H332, H334, H335, H351, H373

Code

Statements

H222

Extremely flammable aerosol

CLP CLASSIFICATION

Acute Tox. 4 ; H332 - Acute toxicity (inhalative) : Category 4 ; Harmful if inhaled. Carc. 2 ; H351 - Carcinogenicity : Category 2 ; Suspected of causing cancer. Eye Irrit. 2 ; H319 - Serious eye damage/eye irritation : Category 2 ; Causes serious eye irritation. Skin Irrit. 2 ; H315 - Skin corrosion/irritation : Category 2 ; Causes skin irritation. Aerosol 1 ; H222 - Aerosols : Category 1 ; Extremely flammable aerosol. Aerosol 1 ; H229 - Aerosols Category 1 ; Pressurised container May burst if heated Resp. Sens. 1 ; H334 - Sensitisation to the respiratory tract : Category 1 ; May cause allergy or asthma symptoms or breathing difficulties if inhaled. Skin Sens. 1 ; H317 - Skin sensitisation : Category 1 ; May cause an allergic skin reaction. STOT SE 3 ; H335 - STOT-single exposure : Category 3 ; May cause respiratory irritation. STOT RE 2 ; H373 - STOT-repeated exposure : Category 2 ; May cause damage to organs through prolonged or repeated exposure.

2.2 Label elements

Labelling according to Regulation (EC) No. 1272/2008 [CLP]

Hazard pictograms

Flame (GHS02) · Health hazard (GHS08) · Exclamation mark (GHS07)

Signal word

Danger

Hazardous Ingredients

DIPHENYLMETHANE DIISOCYANATE, ISOMERE AND HOMOLOGUES ; CAS No. : 9016-87-9

Hazard statements

H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H351 Suspected of causing cancer. H373 May cause damage to organs through prolonged or repeated exposure. H332 Harmful if inhaled. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation.

Precautionary statements

P260 Do not breathe vapours. P102 Keep out of reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P312 Call a POISON CENTER or a doctor if you feel unwell. P342+P311 If experiencing respiratory symptoms: Call a POISON CENTER/doctor/.... P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P337+P313 If eye irritation persists: Get medical advice/attention. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. P501 Dispose of contents/container to approved disposal company or local collection.

Special rules for supplemental label elements for certain mixtures

EUH204 Contains isocyanates. May produce an allergic reaction.

Other physicochemical hazards

Caution! Container is under pressure. Without sufficient ventilation formation of explosive mixtures may be possible. Propellant gas released during foaming is highly flammable.

Potential health effects

At transport the product in the vehicle, the container should stand upright in the boot. The classification refer to the anhardened product. Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product.

Environmental effects

The product does not contain any substances, which fulfil the criteria for PBT or vPvB in accordance with the Annex XIII of the Regulation (EC) No 1907/2006 (REACH-Regulation).