Note: Ingredients listed on restricted chemical lists
EC/CAS
231-072-3/7429-90-5
Name of the chemical
Aluminium
Concentration
N/A
EC/CAS
231-159-6/7440-50-8
Name of the chemical
Copper
Concentration
N/A
EC/CAS
202-510-0/96-49-1
Name of the chemical
ethylene carbonate
Concentration
5-523
EC/CAS
210-478-4/616-38-6
Name of the chemical
dimethyl carbonate
Concentration
2-2853
EC/CAS
231-955-3/7782-42-5
Name of the chemical
Graphite
Concentration
N/A
EC/CAS
235-362-0/12190-79-3
Name of the chemical
Cobaltate (CoO21-), lithium
Concentration
1-100 1-132
General Information
Revision date
2010-12-09
Product name
LITHIUM ION 12V BATTERY PACK
Product Synonyms
Lithium Ion Cells
1.2.1 Relevant identified uses
Battery Pack
supplier name
Brady Worldwide
Manufacturer Name
Brady Worldwide
Emergency telephone
1-800-535-5053, 0032/(0)52.45.79.05
Icons in SDS
Company Information
company name
Brady Worldwide
e-mail address of the competent person responsible for the Safety Data Sheet
REACH_Americas@bradycorp.com
Section 2
SECTION 2: Hazards identification
Hazard statements
Not Applicable EU LABELING AND CLASSIFICATION 67/548/EEC: This product is an article and has no requirements under European Union Council Directive 67/548/EEC and subsequent Directives. Not Applicable Not Applicable
Precautionary statements
Not Applicable The lithium ion cell ingredients are contained in a hermetically sealed case, designed to withstand temperatures and pressures encountered during normal use. As a result, during normal use, hazardous materials are fully contained inside the battery. The battery should not be crushed, deformed, punctured, opened or exposed to heat because exposure to the ingredients contained within could be harmful under some circumstances. The following information is provided for the user's information only. EMERGENCY OVERVIEW
Product definition
This product is a lithium ion battery.
Health hazards
This product is considered a manufactured article and presents negligible health, or reactivity hazards under typical use conditions. If exposure to the electrolyte solution occurs from puncture, heating or other destruction of the outer case, contact with the solution may be harmful by inhalation, skin or eye contact. Inhalation of fumes from burning electrolyte solution may cause burns to respiratory system. Skin or eye contact with the electrolyte solution may also produce burns, especially if contact is prolonged. Flammability Hazards: Batteries can explode during a fire. If involved in a fire, this product can burn and produce toxic gases (e.g. carbon monoxide, carbon dioxide, hydrogen fluoride, phosphine, phosphorous oxides, lithium oxides, lithium hydroxide, nickel oxides, copper oxides and other metal oxides). During a fire involving this product care should be taken to avoid inhalation of fumes. During charging of this battery, a lithium graphite intercalation phase is formed (where lithium and graphite molecules are combined), which is highly flammable and corrosive, but is not released under normal circumstances. Reactivity Hazards: The electrolyte solution can react with water to form hydrofluoric acid. Contact with the anodes can produce hydrogen gas. Environmental Hazards: This product is not expected to cause harm if released to the environment. Emergency Response Considerations: Emergency responders must wear proper personal protective equipment (and have appropriate fire protection) suitable for the situation to which they are responding.