BP Unleaded Gasofines

SECTION 2: Hazards identification

Physical state Liquid. Color Ciear Emergency overview DANGER ! EXTREMELY FLAMMABLE. VAPOR MAY CAUSE FLASH FIRE. INHALATION OF VAPOR/AEROSOL CONCENTRATIONS ABOVE THE RECOMMENDED EXPOSURE LIMITS CAUSES HEADACHES, DIZZINESS, DROWSINESS, AND NAUSEA, AND MAY LEAD TO UNCONSCIOUSNESS OR DEATH. HARMFUL IF SWALLOWED. | HARMFUL OR FATAL IF LIQUID IS ASPIRATED INTO LUNGS. CAUSES EYE AND SKIN IRRITATION. PROLONGED OR REPEATED CONTACT MAY DRY SKIN AND CAUSE IRRITATION. LONG-TERM EXPOSURE TO VAPORS HAS CAUSED CANCER IN LABORATORY ANIMALS. Extremely flammabie liquid. Do not ingest. If ingested, do not induce vomiting. Do not get in eyes or on skin or clothing. Do not breathe vapor er mist. Keep away from heat, sparks and fiame. Keep container tightly closed and sealed until ready for use. Use only with adequate ventilation. Wash thoroughly after handling. Contains material which can cause cancer. Risk of cancer depends on duration and level of exposure.

Principle Routes of Exposure

_ Dermal contact. Eye contact. Inhatation. Ingestion.

Potential health effects

Eyes Causes eye iritation. Skin Causes skin irritation. Prolonged or repeated contact can defat the skin and lead to irritation and/or dermatitis. See toxicological information (Section 11) Inhalation Inhalation of vapor/aerosol concentrations above the recommended exposure limits causes headaches, drowsiness and nausea and may lead to unconsciousness or death. See toxicological information (Section 11) Ingestion Aspiration hazard if swallowed. Can enter lungs and cause damage. See toxicological information (Section 14) See toxicological information (Section 11} Product name BP Unleaded Gasolines Product code 12631 Page: 1/10 Version 1‘ Date of issue 05/23/2011. 6. Accidental release measures Environmental Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. precautions. Inform the relevant authorities if the product has caused environmental poliution (sewers, waterways, soil or air). Personal protection in Chemical splash goggles. Chemical-resistant protective suit. Boots. Chemical-resistant gloves. case of a farge spill Self-contained breathing apparatus (SCBA) should be used to avoid inhalation of the product. Suggested protective clothing might not be adequate. Consult a specialist before handling this product. Methods for cleaning up Large spill Stop leak if without risk. Eliminate all ignition sources. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see section 13). Use spark-proof todls and explosion-proof equipment. Dispose of via a licensed waste disposal contractor. Contaminated absorbent material may pose the same hazard as the spilled product. Note: see section 1 for emergency contact information and section 13 for waste disposal. Small spill Stop leak if without risk. Eliminate all ignition sources. Move containers from spill area. Dilute with water and mop up if water-soluble or absorb with an inert dry material and place in an appropriate waste disposal container. Use spark-proof tools and explosion-proof equipment. Dispose of via a licensed waste disposal contractor. 7. Handling and storage Handling Put on appropriate personal protective equipment (see Section 8). Workers should wash hands and face before eating, drinking and smoking. Do not get in eyes or on skin or clothing. Do not breathe vapor or mist. Do not ingest. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Do not enter storage areas and confined spaces unless adequately ventilated. Store and use away from heat, sparks, open flame or any other ignition source. Use explosion-proof electrical (ventilating, lighting and material handling) equipment. Use non-sparking tools. Take precautionary measures against electrostatic discharges. To avoid fire or explosion, dissipate static electricity during transfer by grounding and bonding containers and equipment before transferring material. Never siphon by mouth. For use as a motor fuel only. Do not use as a cleaning solvent, thinner or for other non-motor fuel uses, Do not use as a portable heater or appliance fuel. Warning! Customers should not re-enter vehicle during the re-fueling process as this can generate static electricity and cause a spark and flash fire hazard if sufficient vapors are present. The flow of gasoline through a pump nozzle can produce static electricity, which may cause a fire if gasoline is pumped into an ungroundéd container. To avoid static spark hazard when filling portable containers: - Fill only containers approved to hold gasoline - Place container on the ground while dispensing fuel. - Do not fill container in or on a vehicle or on a truck or trailer bed. - Keep nozzle in contact with container while filling. Storage Store in accordance with local regulations. Store in a segregated and approved area. Store away from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see section 10). Eliminate afl ignition sources. Separate from oxidizing materials. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination. Other information Do not enter storage tanks without breathing apparatus unless the tank has been well ventilated and the tank atmosphere has been shown to contain hydrocarbon vapor concentrations of less than 1% of the lower flammability limit and an oxygen concentration of at feast 20% volume. Light hydrocarbon vapors can build up in the headspace of tanks. These can cause flammability/explosion hazards even at temperatures below the normal flash point (note: flash point must not be regarded as a reliable indicator of the potential flammability of vapor in tank headspaces). Tank headspaces should always be regarded as potentially flammable and care should be taken to avoid static electrical discharge and all ignition sources during filling, uliaging and sampling from storage tanks. VVhen the product is pumped (e.g. during filling, discharge or ullaging).and when sampling, there is a risk of static discharge. Ensure equipment used is properly earthed or bonded to the tank structure. Electrical equipment should not be used untess it is intrinsically safe (i.e. will not produce sparks). Product name BP Unieaded Gasolines Productcode 12631 Page: 310 Version Date ofissue 05/23/2011.