Transprene 113M - Neoprene Glue

Hazardous Ingredients

OSHA Hazardous Components: MEK Cyclohexane Ethyl Acetate Toluene Polychloropene (CR) ACGIH TLV 200 ppm 300 ppm 400 ppm 100 ppm %: 20% 30% 20% 5% 25% SECTION III - Physical/Chemical Characteristics Boiling Point: 70 degrees C Vapor Pressure (mm Hg): 110 mbar (at 20 degrees C) Vapor Density: (ALR-1): 3 Specific Gravity (H20 - 1): 0.86 Evaporation Rate (Butyl Acetate - 1) Approx. -500

Appearance/Odor

Clear sandy, solvent smelling SECTION IV - Fire and Explosion Hazard Data Flash Point (Method Used): -17 degrees C (closed cup) Extinguishing Media: Powder, CO2, Foam LEL: 1.1% UEL: 12% Continued on next page MSDS - ZODIAC Glue 7098 and 7170 (cont) SECTION V - Reactivity Data Stability: Stable Conditions to Avoid: Overhearting Hazard Decomposition or Byproducts: CO-CO2-HCL Hazard Polymerizarion: Will not occur. SECTION VI - Health Hazard Data

Principle Routes of Exposure

Inhalation, skin and ingestion

Health hazards

acute and chronic) Dermal irritation. Effects of over exposure are narcotic. Carcinogenicity: NTP - No, IARC Monographs - No, OSHA Reg. - No Signs and Symptoms of Exposure: Irritating to skin, eyes and respiratory tract Emergency and First Aid Procedures: Breathe fresh air. In case of contact with skin, eyes wash immediately with abundant soap and water. See a doctor immediately if ingested. SECTION VII - Precautions for Safe Handling and Use Steps to be Taken in Case Material is Released or Spilled: Keep away from fire. Avoid spilling and dripping. Mop up with absorbant materials (sand, sawdust). Residue must be kept in a tightly-closed drum. IDENTITY (as used on label and list): Vinycol 1520 - Polyurethane Glue Glue 7020 - 7096 - 7097 MANUFACTURER'S NAME & ADDRESS: Bostik SA, R.N. 19 77170 Coubert, France EMERGENCY NO. Air Pack - USA 1-800-626-7225 INFORMATION NO. (33) 1.64.92.12.12 Date Prepared January 1994