BOSTIK PERFECT STONE ADHESIVE

Bostik SA

Revision date : 2020-02-18

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS07 GHS08
Health risk rating 5
Safety risk rating 4
Environmental risk rating 3

Note: Ingredients listed on restricted chemical lists

EC/CAS

618-498-9/9016-87-9

Name of the chemical

4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)

Concentration

40-<80 >=0.1%

EC/CAS

287-477-0/85535-85-9

Name of the chemical

Alkanes, C14-17, chloro

Concentration

10-<20 01-2119519269-

General Information

Revision date

2020-02-18

Product name

BOSTIK PERFECT STONE ADHESIVE

Icons in SDS

GHS02 GHS07 GHS08

Company Information

company name

Bostik SA

e-mail address of the competent person responsible for the Safety Data Sheet

SDS.box-EU@bostik.com

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H222, H229, H315, H317, H319, H332, H334, H335, H351, H362, H373, H413

Hazard statements

Code

Statements

H222

Extremely flammable aerosol

Section 2

2.1 Classification of the substance or mixture

Regulation (EC) No 1272/2008 Acute toxicity - Inhalation (Dusts/Mists) Category 4 - (H332) Skin corrosion/irritation Category 2 - (H315) Serious eye damage/eye irritation Category 2 - (H319) Respiratory sensitisation Category 1 - (H334) Skin sensitisation Category 1 - (H317) Carcinogenicity Category 2 - (H351) Effects on or via lactation Yes - (H362) Specific target organ toxicity (single exposure) Category 3 - (H335) Specific target organ toxicity — repeated exposure Category 2 - (H373) Chronic aquatic toxicity Category 4 - (H413) Aerosols Category 1 - (H222, H229)

Contains

Isocyanic acid, polymethylenepolyphenylene ester

Signal word

DANGER

Hazard statements

H315 - Causes skin irritation H317 - May cause an allergic skin reaction H319 - Causes serious eye irritation H332 - Harmful if inhaled H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled H335 - May cause respiratory irritation H351 - Suspected of causing cancer H362 - May cause harm to breast-fed children H373 - May cause damage to organs through prolonged or repeated exposure H413 - May cause long lasting harmful effects to aquatic life H222 - Extremely flammable aerosol H229 - Pressurised container: May burst if heated EUH204 - Contains isocyanates. May produce an allergic reaction

Precautionary statements

P101 - If medical advice is needed, have product container or label at hand P102 - Keep out of reach of children P103 - Read label before use P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking P211 - Do not spray on an open flame or other ignition source P251 - Pressurized container: Do not pierce or burn, even after use P260 - Do not breathe dust/fume/gas/mist/vapours/spray P263 - Avoid contact during pregnancy/while nursing P271 - Use only outdoors or in a well-ventilated area P273 - Avoid release to the environment P280 - Wear protective gloves and eye/face protection P302 + P352 - IF ON SKIN: Wash with plenty of water and soap P304 + P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P410 + P403 - Protect from sunlight. Store in a well-ventilated place P501 - Dispose of contents/container to an approved waste disposal plant Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. Type A1 according to standard EN 14387) is used.

2.3 Other hazards

Pressurized container: Do not pierce or burn, even after use

Results of PBT and vPvB assessment

The components in this formulation do not meet the criteria for classification as PBT or vPvB

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.