Note: Ingredients listed on restricted chemical lists
EC/CAS
618-498-9/9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
40-<80 >=0.1%
General Information
Revision date
2020-01-31
Product name
BOSTIK PERFECT SEAL ALL SEASONS
Emergency telephone
No information available
Icons in SDS
Company Information
company name
Bostik SA
e-mail address of the competent person responsible for the Safety Data Sheet
SDS.box-EU@bostik.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H222, H229, H315, H317, H319, H332, H334, H335, H351, H373
Hazard statements
Code
Statements
H222
Extremely flammable aerosol
Section 2
2.1 Classification of the substance or mixture
Regulation (EC) No 1272/2008 Acute toxicity - Inhalation (Dusts/Mists) Category 4 - (H332) Skin corrosion/irritation Category 2 - (H315) Serious eye damage/eye irritation Category 2 - (H319) Respiratory sensitisation Category 1 - (H334) Skin sensitisation Category 1 - (H317) Carcinogenicity Category 2 - (H351) Specific target organ toxicity (single exposure) Category 3 - (H335) Specific target organ toxicity — repeated exposure Category 2 - (H373) aerosols Category 1 - (H222, H229)
Contains
Isocyanic acid, polymethylenepolyphenylene ester
Signal word
DANGER
Hazard statements
H315 - Causes skin irritation H317 - May cause an allergic skin reaction H319 - Causes serious eye irritation H332 - Harmful if inhaled H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled H335 - May cause respiratory irritation H351 - Suspected of causing cancer H373 - May cause damage to organs through prolonged or repeated exposure H222 - Extremely flammable aerosol H229 - Pressurised container: May burst if heated EUH204 - Contains isocyanates. May produce an allergic reaction
Precautionary statements
P101 - If medical advice is needed, have product container or label at hand P102 - Keep out of reach of children P103 - Read label before use P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking P211 - Do not spray on an open flame or other ignition source P251 - Do not pierce or burn, even after use P260 - Do not breathe dust/fume/gas/mist/vapours/spray P271 - Use only outdoors or in a well-ventilated area P280 - Wear protective gloves/protective clothing and eye/face protection P302 + P352 - IF ON SKIN: Wash with plenty of water and soap P304 + P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P410 + P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F P501 - Dispose of contents/ container to an approved waste disposal plant
Additional information
This product requires tactile warnings if supplied to the general public. . Reserved for industrial and professional use. Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. Type A1 according to standard EN 14387) is used.
2.3 Other hazards
No information available
Results of PBT and vPvB assessment
The components in this formulation do not meet the criteria for classification as PBT or vPvB