Note: Ingredients listed on restricted chemical lists
EC/CAS
618-498-9/9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
80-100 >=0.1%
General Information
Version
1.01
Revision date
2020-05-11
Product name
BOSTIK RENO P520 EASY - PART B
1.2.1 Relevant identified uses
Building and construction work. Joint sealants. Restricted to professional users
1.2.2. Uses advised against
Consumer use
Emergency telephone
+44 (1785) 272650, +353 (1) 8624900
Icons in SDS
Company Information
company name
Bostik GmbH
e-mail address of the competent person responsible for the Safety Data Sheet
SDS.box-EU@bostik.com
GHS Information
Signal word
DANGER
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H332, H334, H335, H351, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
Regulation (EC) No. 1272/2008 Classification of the substance or mixture
Contains
Isocyanic acid, polymethylenepolyphenylene ester
Signal word
DANGER
Hazard statements
H315 - Causes skin irritation. H317 - May cause an allergic skin reaction. H319 - Causes serious eye irritation. H332 - Harmful if inhaled. H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335 - May cause respiratory irritation. H351 - Suspected of causing cancer. H373 - May cause damage to organs through prolonged or repeated exposure. EUH204 - Contains isocyanates. May produce an allergic reaction.
Precautionary statements
P260 - Do not breathe mist/vapours/spray. P280 - Wear protective gloves/protective clothing/eye protection/face protection. P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P304 + P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing. P302 + P352 - IF ON SKIN: Wash with plenty of water and soap. P308 + P313 - IF exposed or concerned: Get medical advice/attention. P402 + P404 - Store in a dry place. Store in a closed container. P501 - Dispose of contents/ container to an approved waste disposal plant.
Additional information
Please refer also to Safety Data Sheet of Part A. Reserved for industrial and professional use.
2.3 Other hazards
Small amounts of methanol (CAS 67-56-1) are formed by hydrolysis and released upon curing
PBT Substances
& vPvB This mixture contains no substance considered to be persistent, bioaccumulating or toxic (PBT) This mixture contains no substance considered to be very persistent nor very bioaccumulating (vPvB)
2.1 Classification of the substance or mixture
Regulation (EC) No 1272/2008 Acute toxicity - Inhalation (Dusts/Mists) Category 4 - (H332) Skin corrosion/irritation Category 2 - (H315) Serious eye damage/eye irritation Category 2 - (H319) Respiratory sensitisation Category 1 - (H334) Skin sensitisation Category 1 - (H317) Carcinogenicity Category 2 - (H351) Specific target organ toxicity (single exposure) Category 3 - (H335) Specific target organ toxicity — repeated exposure Category 2 - (H373)
