EVO-STIK GUN APPLIED PU FOAM FILLER

Hazard statements (CLP)

H222, H229, H315, H317, H319, H332, H334, H335, H351, H362, H373, H413

Code

Statements

H222

Extremely flammable aerosol

2.1 Classification of the substance or mixture

Regulation (EC) No 1272/2008 Acute toxicity - Inhalation (Dusts/Mists) Category 4 - (H332) Skin corrosion/irritation Category 2 - (H315) Serious eye damage/eye irritation Category 2 - (H319) Respiratory sensitisation Category 1 - (H334) Skin sensitisation Category 1 - (H317) Carcinogenicity Category 2 - (H351) Effects on or via lactation Yes - (H362) Specific target organ toxicity (single exposure) Category 3 - (H335) Specific target organ toxicity — repeated exposure Category 2 - (H373) Chronic aquatic toxicity Category 4 - (H413) aerosols Category 1 - (H222, H229)

Contains

Isocyanic acid, polymethylenepolyphenylene ester, Alkanes, C14-17, chloro

Signal word

DANGER

Hazard statements

H315 - Causes skin irritation. H317 - May cause an allergic skin reaction. H319 - Causes serious eye irritation. H332 - Harmful if inhaled. H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335 - May cause respiratory irritation. H351 - Suspected of causing cancer. H362 - May cause harm to breast-fed children. H373 - May cause damage to organs through prolonged or repeated exposure. H413 - May cause long lasting harmful effects to aquatic life. H222 - Extremely flammable aerosol. H229 - Pressurised container: May burst if heated. EUH066 - Repeated exposure may cause skin dryness or cracking.

Precautionary statements

P101 - If medical advice is needed, have product container or label at hand. P102 - Keep out of reach of children. P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 - Do not spray on an open flame or other ignition source. P251 - Pressurized container: Do not pierce or burn, even after use. . P263 - Avoid contact during pregnancy/while nursing. P271 - Use only outdoors or in a well-ventilated area. P273 - Avoid release to the environment. P280 - Wear protective gloves and eye/face protection. P302 + P352 - IF ON SKIN: Wash with plenty of water and soap. P304 + P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P410 + P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. P501 - Dispose of contents/ container to an approved waste disposal plant.

Additional information

This product requires tactile warnings if supplied to the general public. .

Special rules for supplemental label elements for certain mixtures

Reserved for industrial and professional use. Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. Type A1 according to standard EN 14387) is used.

2.3 Other hazards

In case of insufficient ventilation and/or through use, the formation of a explosive/highly flammable mixture is possible

PBT Substances

vPvB This mixture contains no substance considered to be persistent, bioaccumulating or toxic (PBT). This mixture contains no substance considered to be very persistent nor very bioaccumulating (vPvB).