Note: Ingredients listed on restricted chemical lists
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
EC/CAS
238-878-4
Name of the chemical
Quarz-A-Staub (s. u. TRGS 906)
Concentration
N/A
General Information
Revision date
2018-02-21
Product name
Bostik Floor Screed 1010 Thick Flow
supplier name
Bostik AB
Emergency telephone
+46 8 331231 (Swedish Poisons Informations Centre
Icons in SDS
Company Information
company name
Bostik AB
e-mail address of the competent person responsible for the Safety Data Sheet
info.se@bostik.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H318, H335
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
CLP CLASSIFICATION
Skin Irrit. 2;H315 Eye Dam. 1;H318 STOT SE 3;H335 Most serious harmful effects: Causes skin irritation. Causes serious eye damage. May cause respiratory irritation.
Signal word
Danger
Contains
Substance: Portland cement
Hazard statements
H315 Causes skin irritation. H318 Causes serious eye damage. H335 May cause respiratory irritation.
Precautionary statements
P102 Keep out of reach of children. P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P280 Wear protective gloves/protective clothing/eye protection/face protection. P284 Wear respiratory protection. P302/352 IF ON SKIN: Wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy P305+351+338 to do. Continue rinsing.
Additional information
The cement is chrome reduced. Persons who are allergic to chrome should not use the ready to use mixture. Contains quartz!
2.3 Other hazards
Product dust may be irritating to eyes, skin and respiratory system. When cement reacts with water a strong alkaline solution is produced. Prolonged contact with wet cement or wet concrete may cause serious burns because they develop without pain being felt e.g. when kneeling in wet cement even when wearing trousers. Frequent inhalation of large quantities of cement dust over a long period of time increases the risk of developing lung disease. This mixture contains no components considered to be persistent, bioaccumulative and toxic (PBT) or very persistent and very bioaccumulative / vPvB) at levels of 0.1% or higher.
