General Information
Version
1.0
Revision date
2024-08-02
Product name
Bona Wave 2K Hardener
1.2.1 Relevant identified uses
Hardener for 2-Component waterborne finish for timber floors
1.2.2. Uses advised against
Professional use only. Not to be used in spray applications
supplier name
Bona Australia Pty Ltd
Icons in SDS
Company Information
company name
Bona Australia Pty Ltd
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H317, H319, H332, H335, H412
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
GHS Classification –
2.1 Classification of the substance or mixture
GHS CLASSIFICATION HAZARD CLASS & CATEGORY The product is a mixture and has been assessed under the Model Work Health and Safety Regulations with the following Classification Sensitisation Skin - Category 1 Eye Damage / Irritation - Category 2A Acute Toxicity - Inhalation - Category 4 Specific Target Organ Toxicity (Single Exposure) - Category 3 Chronic Aquatic Toxicity - Category 3 2.2 LABEL ELEMENTS INCLUDING PRECAUTIONARY STATEMENTS
Signal word
Warning
Hazard statements
H317 - May cause an allergic skin reaction. H319 - Causes serious eye irritation. H332 - Harmful if inhaled. H335 - May cause respiratory irritation. H412 - Harmful to aquatic life with long lasting effects.
Prevention
P102 - Keep out of reach of children. P103 - Read label before use. P210 - Keep away from heat, hot surfaces, sparks open flames and other ignition sources. No smoking. P261 - Avoid breathing mists/vapours/spray. P264 - Wash hands thoroughly after handling. P271 - Use only outdoors or a in well-ventilated area. P272 - Contaminated work clothing should not be allowed out of the workplace. P273 - Avoid release to the environment. P280 - Wear protective gloves/protective clothing/eye protection/face protection. Continued –
Response
P101 - If medical advice is needed, have product container or label at hand. P302 + P352 - IF ON SKIN: Wash with plenty of soap and water. P304 + P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312 - Call a POISON CENTRE (Phone in Australia 131 126; New Zealand 0800 764 766) or doctor/physician if you feel unwell. P333 + P313 - If skin irritation or rash occurs: Get medical advice / attention. P337 + P313 - If eye irritation persists: Get medical advice / attention. P262 + P364 - Take off contaminated clothing and wash it before reuse.
Storage
P403 + P233 - Store in a well-ventilated place. Keep container tightly closed. P405 - Store locked up.
Disposal
P501 - Dispose of contents/container in accordance with local regulations.
2.3 Other hazards
– This product contains isocyanate components and based upon these types of compounds the product may cause sensitisation of the respiratory system leading to an asthmatic condition, wheezing and tightness of the chest. People previously sensitised to isocyanates may exhibit asthmatic symptoms well below the nominated Occupational Exposure Level. Persons with a history of asthma, allergies or chronic or recurrent respiratory disease should not be employed in any process in which this product is used. As for all chemical products, persons should not expose open wounds, cuts, abrasions or irritated skin to the material.