Note: Ingredients listed on restricted chemical lists
EC/CAS
231-105-1/7439-96-5
Name of the chemical
Manganese
Concentration
0.9 to 2%
EC/CAS
231-159-6/7440-50-8
Name of the chemical
Copper
Concentration
<0.5%
EC/CAS
231-153-3/7440-44-0
Name of the chemical
Carbon black
Concentration
0.06 to 0.19%
EC/CAS
231-072-3/7429-90-5
Name of the chemical
Aluminium
Concentration
<0.15%
EC/CAS
231-176-9/7440-67-7
Name of the chemical
Zirconium and its compounds, with the exception of the substances listed under reference number 50 in Annex III, and the zirconium lakes, pigments or salts of the colouring agents when listed in Annex IV
Concentration
<0.12%
General Information
Version
1.2
Revision date
2025-03-28
Product name
BW 001 SOLID CARBON STEEL WIRE ELECTRODES & RODS
Product Synonyms
1091250, 1101250, 1121250, 1061155; 1081155, 1091155, 1101155, 1121155, 1061108, 1081108, 1091108, 1091150, 1081155, 1061155 - PART NUMBER(S) ● 3208 - SDS NUMBER ● BOC MILD STEEL
1.2.1 Relevant identified uses
ARC WELDING ● WELDING APPLICATIONS
supplier name
BOC LIMITED (AUSTRALIA)
Icons in SDS
Company Information
company name
BOC LIMITED (AUSTRALIA)
GHS Information
Signal word
WARNING
Hazard Codes
Hazard statements (CLP)
H373
Hazard statements
Code
Statements
H373
May cause damage to organs through prolonged or repeated exposure
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture
Physical hazards
Not classified as a Physical Hazard
Health hazards
Specific Target Organ Toxicity (Repeated Exposure): Category 2
Environmental hazards
Not classified as an Environmental Hazard
Signal word
WARNING
Hazard statements
H373 May cause damage to organs through prolonged or repeated exposure.
Prevention
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
Response
P314 Get medical advice/attention if you feel unwell.
Storage
None allocated.
Disposal
P501 Dispose of contents/container in accordance with relevant regulations.
2.3 Other hazards
Product is considered non-hazardous under normal conditions and does not present an inhalation, ingestion, skin, or eye hazard. Hazard statements relate to exposure to dust or fumes during use. Electrical shock can kill. If welding must be performed in damp locations or with wet clothing, on metal structures or when in cramped position such as sitting, kneeling or lying, or if there is a high risk of unavoidable or accidental contact with work piece, use the following equipment: semiautomatic DC Welder, DC Manual (Stick) Welder, or AC Welder with Reduced Voltage Control. Arc rays can injure eyes and burn skin. Welding arc and sparks can ignite combustibles and flammable materials. Overexposure to welding fumes and gases can be hazardous.
2.1 Classification of the substance or mixture
CLASSIFIED AS HAZARDOUS ACCORDING TO SAFE WORK AUSTRALIA CRITERIA Physical Hazards Not classified as a Physical Hazard Health Hazards Specific Target Organ Toxicity (Repeated Exposure): Category 2 Environmental Hazards Not classified as an Environmental Hazard
