ProOne 2K Foam B2WA

Hazard statements (CLP)

H222, H229, H315, H317, H319, H332, H334, H335, H351, H373, H412

Code

Statements

H222

Extremely flammable aerosol

SECTION 2: Hazards identification

Contains

Diphenylmethane-diisocyanate, isomers and homologues.

Signal word

Danger H315: Causes skin irritation. H317: May cause an allergic skin reaction. H319: Causes serious eye irritation. H332: Harmful if inhaled. H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335: May cause respiratory irritation. H351: Suspected of causing cancer. H373: May cause damage to organs through prolonged or repeated exposure. H412: Harmful to aquatic life with long lasting effects H222: Extremely flammable aerosol. H229: Pressurised container, may burst if heated.

Hazard statements

EEUH204: Contains isocyanates. May produce an allergic reaction.

Precautionary statements

P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211: Do not spray on an open flame or other ignition source. P251: Pressurized container, do not pierce or burn, even after use. P260: Do not breathe mist/vapours/spray. P271: Use only outdoors or in a well-ventilated area. P273: Avoid release to the environment. P280: Wear protective gloves and eye/face protection. P302 + P352 IF ON SKIN Wash with plenty of soap and water. P304 + P340 IF INHALED Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305 + P351 + P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P342 + P311: If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician. P405: Store locked up. P501: Dispose of contents as hazardous waste in accordance with local/regional/national/international regulations. ProOne 2K Foam B2WA 1

Special rules for supplemental label elements for certain mixtures

F. Additional information This product requires tactile warnings if supplied to As from 24 August 2023 adequate training is the general public. required before industrial or professional use. Never

2.3 Other hazards

expose cans to direct or uncontrolled heat. Never use In case of insufficient ventilation and/or through use, above 25 °C can temperature. If necessary, cool the the formation of a explosive/highly flammable mixture can in a water bath. When the two components are is possible. During transportation by car the cans mixed (activated) in the 2-component can, heat of should stand upright in the cargo space. When foaming reaction develops. After activation, process the can the propellants are highly flammable. The mentioned immediately within the time period specified by the hazards are valid for the non-reacted content of the can manufacturer. Otherwise there is danger of bursting. or of the fresh foam. May be harmful if swallowed. Persons already sensitised to diisocyanates may

PBT Substances

vPvB this mixture contains no substance develop allergic reactions when using this product. considered to be persistent, bioaccumulating or toxic Persons suffering from asthma, eczema or skin This mixture contains no substance considered problems should avoid contact, including dermal to be very persistent nor very bioaccumulating (vPvB). contact, with this product. This product should not Endocrine Disruptor Information: this product does not be used under conditions of poor ventilation unless contain any known or suspected endocrine disruptors. a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used.