ProOne 1K Montage Foam B240

Hazard statements (CLP)

H222, H229, H315, H317, H319, H332, H334, H335, H351, H373

Code

Statements

H222

Extremely flammable aerosol

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

EEUH204: Contains isocyanates. May produce an

Additional information

P410 + P412 Protect from sunlight. Do not expose to This product requires tactile warnings if supplied to temperatures exceeding 50°C/122°F. the general public. P501 Dispose of contents as hazardous waste in 3. Other hazards accordance with local/regional/national/international In case of insufficient ventilation and/or through use, regulations. the formation of a explosive/highly flammable mixture E. Special provisions concerning the labelling of certain is possible. During transportation by car the cans mixtures should stand upright in the cargo space. When foaming Persons already sensitised to diisocyanates may the propellants are highly flammable. The mentioned develop allergic reactions when using this product. hazards are valid for the non-reacted content of the can Persons suffering from asthma, eczema or skin or of the fresh foam. May be harmful if swallowed. problems should avoid contact, including dermal PBT & vPvB: this mixture contains no substance contact, with this product. This product should not considered to be persistent, bioaccumulating or toxic be used under conditions of poor ventilation unless (PBT). This mixture contains no substance considered a protective mask with an appropriate gas filter (i.e. to be very persistent nor very bioaccumulating (vPvB). Type A1 according to standard EN 14387) is used. As