General Information
Revision date
2015-05-29
Product name
SARA 313 CHEM YES
Product name
SARA 313 CHEM YES
Identification on the label/Trade name
VASCOMILL 10
1.2.2. Uses advised against
No further relevant information available
Emergency telephone
1-800-424-9300, +1-703-527-3887
Icons in SDS
Company Information
company name
BLASER SWISSLUBE, Inc
e-mail address of the competent person responsible for the Safety Data Sheet
mailboxusa@blaser.com, reach@blaser.com
Section 2
2.1 Classification of the substance or mixture
The product is not classified according to the Globally Harmonized System (GHS). The product is not classified according to the Globally Harmonized System (GHS).
2.2 Label elements
GHS label elements not applicable Hazard pictograms not applicable Signal word not applicable Hazard statements not applicable
Other hazards
None Chemical characterization: Mixtures Description: Mixture of esters and additives Declarable components: CAS no. not applicable
Additional information
The specific chemical identity and/or exact percentage concentration of proprietary components is withheld as a trade secret. Description of first aid measures After inhalation Supply fresh air consult doctor in case of complaints raye 2/0 Issued on 05/29/2015 Edition number 2 Reviewed on 05/29/2015 Trade name: VASCOMILL 10 (Contd. of page 1) After swallowing: If symptoms persist consult doctor. Information for doctor: Most important symptoms and effects, both acute and delayed No further relevant information available. Indication of any immediate medical attention and special treatment needed No further relevant information available. Extinguishing media Suitable extinguishing agents: CO., extinguishing powder or water spray. Fight larger fires with water spray. For safety reasons unsuitable extinguishing agents: Water with full jet Special hazards arising from the substance or mixture No further relevant information available. Advice for firefighters Protective equipment: No special measures required. Cool endangered receptacles with water spray Personal precautions, protective equipment and emergency procedures Not required. Environmental precautions: Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water. Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Reference to other sections No dangerous substances are released. See Section 7 for information on safe handling. See Section 8 for information on personal protection equipment. See Section 13 for disposal information. Handling: Precautions for safe handling The product has been classified and marked in accordance with directives on hazardous materials. Observe the general safety regulations when handling chemicals. Information about protection against explosions and fires: No special measures required. Conditions for safe storage, including any incompatibilities The lists that were valid during the creation were used as basis Exposure controls Personal protective equipment: General protective and hygienic measures: Wash hands before breaks and at the end of work. Respiratory Protection: Not required. Material of gloves (recommended): Suitable protective gloves: Nitrile gloves, minimum thickness of 0.3 mm. Breakthrough time of glove material: The exact breakthrough time has to be found out by the manufacturer of the protective gloves and has to be observed. Eye protection (recommended): Eye protector with side protection (framed eyeglasses) ANSI Z87.1 — 2010 Use of tight fitting goggles Body protection (recommended): Protective work clothing Information on basic physical and chemical properties General Information Appearance: Form: Liquid Color: Amber colored Odor: Weak, characteristic Odor threshold: Not determined. pH-value: Not determined. Change in condition: Melting point/Melting range: Not applicable Boiling point/Boiling range: > 572°F (> 300 °C) ASTM D86 Flash point: 406°F (208 °C) ASTM D92 Flammability (solid, gaseous): Not applicable. Decomposition temperature: Not determined. Auto igniting: Product is not selfigniting. Explosion limits (@1013 mbar): Lower: Not determined. Upper: Not determined. Vapor pressure: Not determined. Density: Relative density 0.90 @ 68°F (20 °C) ASTM D1217 Vapour density Not determined. Evaporation rate Not determined. Solubility in / Miscibility with Water: Insoluble. Partition coefficient (n-octanol/water): Not determined. (Contd. on page 4) raye 4/0 SVESSEUBE: Issued on 05/29/2015 Edition number 2 Reviewed on 05/29/2015 Trade name: VASCOMILL 10 (Contd. of page 3) Viscosity Dynamic: Not determined. Kinematic: 10 mm?7/s @ 104°F (40 °C) ASTM D445 VOC content 12 g/l (ASTM E1868-10); Concentrate in the packaging as sold.
Storage
Requirements to be met by storerooms and receptacles: Store only in the original receptacle. information about storage in one common storage facility: Store away from oxidizing agents. Further information about storage conditions: Protect from heat and direct sunlight. Storage temperature between 14°F and 104°F Optimal storage temperature between -10 °C and +40 °C. Duration of Storage: In closed, original container, at least 36 months. Specific end use(s) No further relevant information available. raye o/0 Vel Issued on 05/29/2015 Edition number 2 Reviewed on 05/29/2015 Trade name: VASCOMILL 10 (Contd. of page 2) Control parameters Components with limit values at the workplace: NIOSH Recommended exposure limit for Metalworking fluids: 0.5mg/m3 (particulate)
Further information
none Reactivity None known if used as directed. Chemical stability Stable under recommended storage conditions. Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications. Possibility of hazardous reactions Reacts with strong oxidizing agents. Conditions to avoid No further relevant information available. Incompatible materials: No further relevant information available. Hazardous decomposition products (in case of fire or oxidation): Carbon monoxide and carbon dioxide Sulfur oxides (SOx) Additional information: No hazardous decomposition products can be expected when properly handled and stored. Release of flammable substances in distillation systems with solvent recovery possible. Risk of accumulation in the solvent circuit. Formation of trimethyl pentene possible. Formation of hydrogen sulfide possible. Information on toxicological effects Acute toxicity: LD/LC50 values that are relevant for classification: > 2000 - < 5000 mg / kg (oral, rat) > 5,100 mg/m? 4h (inhalation, rat) Primary irritant effect: on the skin: No irritant effect. on the eye: No irritating effect. Sensitization: No sensitizing effects known.