SP-200 PART A

BJB Enterprises, Inc

Revision date : 2014-01-16

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS08
Health risk rating 5
Safety risk rating 5
Environmental risk rating 5

Note: Ingredients listed on restricted chemical lists

EC/CAS

101-68-8

Name of the chemical

4,4’-Methylenediphenyl diisocyanate

Concentration

30-40

EC/CAS

5873-54-1

Name of the chemical

2,4’-Methylenediphenyl diisocyanate

Concentration

20-30

EC/CAS

7631-86-9

Name of the chemical

Silver adsorbed on silicon dioxide

Concentration

0.5-1.5

EC/CAS

1344-28-1

Name of the chemical

aluminium oxide

Concentration

0.5-1.5

EC/CAS

1330-20-7

Name of the chemical

Xylene

Concentration

0.1-1

Listed in

General Information

Revision date

2014-01-16

Product name

SP-200 PART A

1.2.1 Relevant identified uses

Polyurethane resin

Manufacturer Name

BJB Enterprises, Inc

Emergency telephone

(800) 424-9300, (703) 527-3887

Icons in SDS

GHS08

Company Information

company name

BJB Enterprises, Inc

GHS Information

Signal word

DANGER

Section 2

SECTION 2: Hazards identification

GHS Classification GHS CLASSIFICATIONS Health Acute Toxicity (Inhalation), Category 4 Skin Irritation, Category 2 Eye Irritation, Category 2A Respiratory Sensitization, Category 1 Skin Sensitization, Category 1 Carcinogenicity, Category 2 Target Organ Toxicity (Single exposure), Category 3 Target Organ Toxicity (Repeated exposure), Category 2

Signal word

DANGER

Hazard statements

H332: Harmful if inhaled. H315: Causes skin irritation. H319: Causes serious eye irritation. H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317: May cause an allergic skin reaction. H351: Suspected of causing cancer . H335: May cause respiratory irritation. H373: May cause damage to organs through prolonged or repeated exposure .

Prevention

P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P260: Do not breathe dust/fume/gas/mist/vapours/spray. P271: Use only outdoors or in a well-ventilated area. P285: In case of inadequate ventilation wear respiratory protection. P264: Wash … thoroughly after handling. P272: Contaminated work clothing should not be allowed out of the workplace. P280: Wear protective gloves/protective clothing/eye protection/face protection.

Response

P304+P341 IF INHALED If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing P342+P311 If experiencing respiratory symptoms Call a POISON CENTER or doctor/physician P302+P352 IF ON SKIN Wash with plenty of soap and water P321: Specific treatment (see … on this label). P333+P313 If skin irritation or rash occurs Get medical advice/attention P362: Take off contaminated clothing and wash before reuse. P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do Continue rinsing. P337+P313 If eye irritation persists Get medical advice/attention P308+P313 IF exposed or concerned Get medical advice/attention

Storage

P403+P233: Store in a well-ventilated place. Keep container tightly closed. P405: Store locked up.

Disposal

P501: Dispose of contents/container in accordance with local/regional/national/international regulations. EMERGENCY OVERVIEW

Appearance/Odor

Pale yellow liquid with a slight musty odor IMMEDIATE CONCERNS: Harmful by inhalation. Use in well ventilated areas. Irritating to eyes, skin, and respiratory system. May cause sensitization by inhalation and skin contact. This product is a respiratory irritant and potential respiratory sensitizer. Repeated inhalation of vapour or aerosol at levels above the occupational exposure limit could cause respiratory sensitization. A hyper-reactive response to even minimal concentrations of diisocyanates may develop in sensitized persons. The onset of the respiratory symptoms may be delayed for several hours after exposure. Reacts slowly with water to produce carbon dioxide which may rupture closed containers. This reaction accelerates at higher temperatures. Do not breathe vapor or mist. Do not get on skin or clothing. Avoid contact with eyes. Use only with adequate ventilation. Keep container tightly closed and sealed until ready for use. Wash thoroughly after handling.

Potential health effects

EYES: Causes serious eye irritation. SKIN: Causes skin irritation. May cause an allergic skin reaction. INGESTION: May be harmful if swallowed. INHALATION: Harmful if inhaled. Inhalation at levels above the occupational exposure limit could cause respiratory sensitization and risk of serious damage to the respiratory system.

Medical Conditions Generally Aggravated by Exposure

Pre-existing eye, skin, and respiratory conditions may be aggravated by exposure

Principle Routes of Exposure

Eye and skin contact, inhalation of vapors, or accidental ingestion TARGET ORGANS Contains material which causes damage to the following organs upper respiratory tract SENSITIZATION: May cause allergic skin and respiratory reaction.

2.1 Classification of the substance or mixture

Health: Acute Toxicity (Inhalation), Category 4 Skin Irritation, Category 2 Eye Irritation, Category 2A Respiratory Sensitization, Category 1 Skin Sensitization, Category 1 Carcinogenicity, Category 2 Target Organ Toxicity (Single exposure), Category 3 Target Organ Toxicity (Repeated exposure), Category 2

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.