Anhydrous DMSO

Hazard statements (CLP)

H227

Code

Statements

H227

Combustible liquid

SECTION 2: Hazards identification

Classified as hazardous according to Hazardous Products Regulation SOR/2015-17 (as amended by SOR/2022-272). ▼Classification of the substance or mixture Flam. Liq. 4; H227, Combustible liquid

Hazard pictograms

Not applicable.

Signal word

Warning

Hazard statements

Combustible liquid (H227)

Precautionary statements

General -

Prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. (P210)

Response

In case of fire: Use water mist/carbon dioxide/alcohol-resistant foam to extinguish. (P370+P378)

Storage

-

Disposal

-

Hazardous Ingredients

Does not contain any substances required to report

Additional information

Not applicable.

2.1 Classification of the substance or mixture

Flam. Liq. 4; H227, Combustible liquid 2.2. Label elements ▼Hazard pictogram(s) Not applicable. ▼Signal word Warning ▼Hazard statement(s) Combustible liquid (H227) Precautionary statement(s) General - ▼Prevention Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. (P210) Response In case of fire: Use water mist/carbon dioxide/alcohol-resistant foam to extinguish. (P370+P378) ▼Storage - ▼Disposal - ▼Hazardous substances Does not contain any substances required to report Additional labelling Not applicable. SECTION 3: Composition/Information on Ingredients 3.1. ▼Substances Product/substance Identifiers % w/w Classification Note Dimethyl sulfoxide CAS No.: 67-68-5 95-100% 3.2. Mixtures Not applicable. This product is a substance. See full text of H-phrases in section 16. Occupational exposure limits are listed in section 8, if these are available. Other information - No ingredients present at concentrations classified as harmful to health or the environment. SECTION 4: First-aid measures 4.1. ▼Description of first aid measures General information If breathing is irregular, drowsiness, loss of consciousness or cramps: Call 911 and give immediate treatment (first aid). Contact a doctor if in doubt about the injured person’s condition or if the symptoms persist. Never give an unconscious person water or other drink. Inhalation Upon breathing difficulties or irritation of the respiratory tract: Bring the person into fresh air and stay with him/her. Skin contact Remove contaminated clothing and shoes immediately. Ensure to wash exposed skin thoroughly with water and soap. Skin cleanser can be used. DO NOT use solvents or thinners. Eye contact If in eyes: Flush eyes with water or saline water (20-30 °C) for at least 5 minutes. Remove contact lenses. Seek medical assistance and continue flushing during transport. Ingestion If the person is conscious, rinse the mouth with water and stay with the person. Never give the person anything to drink. In case of malaise, seek medical advice immediately and bring the safety data sheet or label from the product. Do not induce vomiting, unless recommended by the doctor. Have the person lean forward with head down to avoid inhalation of or choking on vomited material. ▼Burns Not applicable. 4.2. Most important symptoms and effects, both acute and delayed Neurotoxic effects: This product contains organic solvents, which may cause adverse effects to the nervous system. Symptoms of neurotoxicity include: loss of appetite, headache, dizziness, ringing in ears, tingling sensations of skin, sensitivity to the cold, cramps, difficulty in concentrating, tiredness, etc. Repeated exposure to solvents can result in the breaking down of the skin's natural fat layer and may result in an increased absorption potential of other hazardous substances at the area of exposure. 4.3. Indication of any immediate medical attention and special treatment needed Treat symptomatically. Information to medics Bring this safety data sheet or the label from this product. SECTION 5: Fire-fighting measures 5.1. Extinguishing media Suitable extinguishing media: Alcohol-resistant foam, carbon dioxide, powder, water mist. Unsuitable extinguishing media: Waterjets should not be used, since they can spread the fire. 5.2. ▼Special hazards arising from the substance or mixture Combustible liquid In use may form flammable/explosive vapour-air mixture. Fire will result in dense smoke. Exposure to combustion products may harm your health. Closed containers, which are exposed to fire, should be cooled with water. Do not allow fire-extinguishing water to enter the sewage system and nearby surface waters. If the product is exposed to high temperatures, e.g. in the event of fire, dangerous decomposition compounds are produced. These are: Sulphur oxides Carbon oxides (CO / CO2) 5.3. Advice for firefighters Wear self-contained breathing apparatus and protective clothing to prevent contact. Upon direct exposure contact a poison centre in order to obtain further advice. See section 1 “Emergency telephone number”. SECTION 6: Accidental release measures 6.1. ▼Personal precautions, protective equipment and emergency procedures Ensure adequate ventilation, especially in confined areas. Contaminated areas may be slippery. 6.2. Environmental precautions Avoid discharge to lakes, streams, sewers, etc. Keep unauthorized persons away from the spill 6.3. Methods and material for containment and cleaning up Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations. Wherever possible cleaning should be performed with normal cleaning agents. Avoid use of solvents. 6.4. Reference to other sections See section 13 “Disposal considerations” on handling of waste. See section 8 "Exposure controls/personal protection" for protective measures. SECTION 7: Handling and storage 7.1. ▼Precautions for safe handling Avoid static electricity. Protect electrical equipment in accordance with current standards. To divert static electricity during transmission, containers must be grounded and connected by wire with the receiving containers. Do not use spark-forming tools. Avoid contact during pregnancy and while nursing. Smoking, drinking and consumption of food is not allowed in the work area. See section 8 "Exposure controls/personal protection" for information on personal protection. 7.2. ▼Conditions for safe storage, including any incompatibilities Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Recommended storage material Always store in containers of the same material as the original container. Storage conditions Keep container tightly closed in a dry and well-ventilated place. Desiccate. Room temperature or below. For Biotium products where the label indicates room temperature or RT, this implies storage in ambient conditions between 20°C and 30°C. Incompatible materials Strong acids, strong bases, strong oxidizing agents, and strong reducing agents. 7.3. Specific end use(s) This product should only be used for applications quoted in section 1.2. SECTION 8: Exposure controls/personal protection 8.1. Control parameters No substances are listed in any provincial list of substances with an occupational exposure limit. 8.2. Exposure controls Compliance with the given occupational exposure limits values should be controlled on a regular basis. General recommendations Smoking, drinking and consumption of food is not allowed in the work area. Exposure scenarios There are no exposure scenarios implemented for this product. Exposure limits Professional users are subjected to the legally set maximum concentrations for occupational exposure. See occupational hygiene limit values above. Appropriate technical measures The formation of vapours must be kept at a minimum and below current limit values (see above). Installation of a local exhaust system if normal air flow in the work room is not sufficient is recommended. Ensure eyewash and emergency showers are clearly marked. Apply standard precautions during use of the product. Avoid inhalation of vapours. Hygiene measures In between use of the product and at the end of the working day all exposed areas of the body must be washed thoroughly. Pay special attention to hands, forearms and face. Measures to avoid environmental exposure No specific requirements. Individual protection measures, such as personal protective equipment Generally Use only protective equipment with a recognized certification mark, e.g. the UL mark. Respiratory Equipment Type Class Colour Standards Not required; except in N/A case of aerosol formation. ▼Skin protection Recommended Type/Category Standards No specific - requirements. Hand protection Material Glove thickness (mm) Breakthrough time Standards (min.) Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. Eye protection Type Standards Safety glasses with EN166 side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state Liquid Colour Clear Odour Mild ▼Odour threshold (ppm) No data available. ▼pH No data available. ▼Density (g/cm³) No data available. ▼Kinematic viscosity No data available. Particle characteristics Does not apply to liquids. Phase changes Melting point/Freezing point (°C) 16-19 Softening point/range (°F) Does not apply to liquids. Boiling point (°C) 189 ▼Vapour pressure No data available. Relative vapour density 1.1 g/mL ▼Decomposition temperature (°C) No data available. Data on fire and explosion hazards Flash point (°C) 0 ▼Flammability (°C) No data available. Auto-ignition temperature (°C) 300 - 302 ▼Explosion limits (% v/v) No data available. Solubility ▼Solubility in water No data available. n-octanol/water coefficient (LogKow) 0 ▼Solubility in fat (g/L) No data available. 9.2. Other information Decomposition temperature (Self-reactive substances and mixtures) (°C) > 190 Other physical and chemical parameters No data available. Oxidizing properties No data available. SECTION 10: Stability and reactivity 10.1. Reactivity No data available. 10.2. Chemical stability The product is stable under the conditions, noted in section 7 “Handling and storage”. 10.3. Possibility of hazardous reactions None known. 10.4. Conditions to avoid Do not expose to any forms of heat (e.g. solar radiation). May lead to excess pressure. Heat, flames and sparks. 10.5. Incompatible materials Strong acids, strong bases, strong oxidizing agents, and strong reducing agents. 10.6. ▼Hazardous decomposition products Under normal conditions of storage and use, hazardous decomposition products should not be produced. SECTION 11: Toxicological information 11.1. Information on toxicological effects ▼Acute toxicity Product/substance Dimethyl sulfoxide Test method: OECD 401 Species: Rat, male/female Route of exposure: Oral Test: LD50 Result: 28,300 mg/kg Product/substance Dimethyl sulfoxide Test method: OECD 403 Species: Rat, male/female Route of exposure: Inhalation Test: LC50 Result: 4h - > 5.33 mg/L Product/substance Dimethyl sulfoxide Species: Rat, male/female Route of exposure: Dermal Test: LD50 Result: 40,000 mg/kg Based on available data, the classification criteria are not met. ▼Skin corrosion/irritation Product/substance Dimethyl sulfoxide Test method: OECD 404 Species: Rabbit Description: Slight irritation 4 h Based on available data, the classification criteria are not met. ▼Serious eye damage/irritation Product/substance Dimethyl sulfoxide Test method: OECD 405 Species: Rabbit Description: Slight irritation - 24 h Based on available data, the classification criteria are not met. ▼Respiratory sensitisation Product/substance Dimethyl sulfoxide Test method: OECD 406 Species: Guinea pig Description: Negative Product/substance Dimethyl sulfoxide Test method: OECD 429 Species: Mouse Description: Negative Based on available data, the classification criteria are not met. ▼Skin sensitisation Product/substance Dimethyl sulfoxide Test method: OECD 406 Species: Guinea pig Description: Negative Product/substance Dimethyl sulfoxide Test method: OECD 429 Species: Mouse Description: Negative Based on available data, the classification criteria are not met. ▼Germ cell mutagenicity Product/substance Dimethyl sulfoxide Test method: OECD 471 Species: S. typhimurium Description: Negative Product/substance Dimethyl sulfoxide Test method: OECD Test Guideline 479 Species: Chinese Hamster Ovary (CHO) Description: Negative Product/substance Dimethyl sulfoxide Test method: OECD 473 Species: Chinese Hamster Ovary (CHO) Description: Negative Product/substance Dimethyl sulfoxide Test method: OECD 474 Species: Rat Description: Negative Based on available data, the classification criteria are not met. Carcinogenicity Based on available data, the classification criteria are not met. Reproductive toxicity Based on available data, the classification criteria are not met. STOT-single exposure Based on available data, the classification criteria are not met. STOT-repeated exposure Based on available data, the classification criteria are not met. Aspiration hazard Based on available data, the classification criteria are not met. Long term effects Neurotoxic effects: This product contains organic solvents, which may cause adverse effects to the nervous system. Symptoms of neurotoxicity include: loss of appetite, headache, dizziness, ringing in ears, tingling sensations of skin, sensitivity to the cold, cramps, difficulty in concentrating, tiredness, etc. Repeated exposure to solvents can result in the breaking down of the skin's natural fat layer and may result in an increased absorption potential of other hazardous substances at the area of exposure. Other information None known. SECTION 12: Ecological information 12.1. ▼Toxicity Product/substance Dimethyl sulfoxide Test method: OECD 203 Species: Fish, Danio rerio Duration: 96 hours Test: LC50 Result: 25,000 mg/L Product/substance Dimethyl sulfoxide Test method: OECD 202 Species: Daphnia Duration: 48 hours Test: EC50 Result: 24,600 mg/L Product/substance Dimethyl sulfoxide Test method: OECD 201 Species: Algae, Pseudokirchneriella subcapitata Duration: 72 hours Test: ErC50 Result: 17,000 mg/L Product/substance Dimethyl sulfoxide Test method: ISO 8192 Species: Bacteria Compartment: Activated Sludge Plant Duration: 30 min. Test: EC50 Result: 10 - 100 mg/L Based on available data, the classification criteria are not met. 12.2. Persistence and degradability Based on available data, the classification criteria are not met. 12.3. Bioaccumulative potential Product/substance Dimethyl sulfoxide Conclusion: Potential for bioaccumulation Test: OECD Test Guideline 301D 12.4. Mobility in soil No data available. 12.5. Results of PBT and vPvB assessment This mixture/product does not contain any substances known to fulfil the criteria for PBT and vPvB classification. 12.6. Other adverse effects This product contains substances with the potential of bioaccumulation resulting in the risk of accumulation in the food chain. Bioaccumulative substances are concentrated in adipose tissue and are not easily secreted. SECTION 13: Disposal considerations Waste treatment methods None of the components are listed Specific labelling Contaminated packing Packaging containing residues of the product must be disposed of similarly to the product. SECTION 14: Transport information 14.1 14.2 14.3 14.4 14.5 Other UN / ID UN proper shipping name Hazard class(es) PG* Env** informatio n: TDG - IMDG - IATA - * Packing group ** Environmental hazards ▼Additional information Not dangerous goods according to TDG, IATA and IMDG. 14.6. Special precautions for user Not applicable. 14.7. Transport in bulk according to Annex II of Marpol and the IBC Code No data available. SECTION 15: Regulatory information 15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture 15.2. ▼Canadian lists NDSL None of the components are listed ▼DSL Dimethyl sulfoxide 15.4. ▼Restrictions for application Restricted to professional users. Pregnant women and women breastfeeding must not be exposed to this product. The risk, and possible technical precautions or design of the workplace needed to eliminate exposure, must be considered. 15.5. Demands for specific education No specific requirements. Additional information Not applicable. 15.7. Chemical safety assessment No Sources Hazardous Products Regulation SOR/2015-17 (as amended by SOR/2022-272) SECTION 16: Other information The full text of identified uses as mentioned in section 1 None known. Abbreviations and acronyms ANSI = American National Standards Institute ATE = Acute Toxicity Estimate BCF = Bioconcentration Factor CAS = Chemical Abstracts Service DSL = Domestic Substances List GHS = Globally Harmonized System of Classification and Labelling of Chemicals HHNOC = Health Hazards Not Otherwise Classified IARC = International Agency for Research on Cancer IATA = International Air Transport Association IMDG = International Maritime Dangerous Goods LogPow = logarithm of the octanol/water partition coefficient MARPOL = International Convention for the Prevention of Pollution From Ships, 1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution) NDSL = Non-domestic substances list OECD = Organisation for Economic Co-operation and Development PBT = Persistent, Bioaccumulative and Toxic PHNOC = Physical Hazards Not Otherwise Classified RID = The Regulations concerning the International Carriage of Dangerous Goods by Rail SCL = A specific concentration limit. SOR = Statutory Orders and Regulations STEL = Short-term exposure limits STOT-RE = Specific Target Organ Toxicity - Repeated Exposure STOT-SE = Specific Target Organ Toxicity - Single Exposure TDG = Transportation of Dangerous Goods TWA = Time weighted average UN = United Nations UVBC = Unknown or variable composition, complex reaction products or of biological materials VOC = Volatile Organic Compound vPvB = Very Persistent and Very Bioaccumulative WHIMS = Workplace Hazardous Materials Information System ▼Additional information Not applicable. The information provided above is believed to be correct to our best knowledge, but does not purport to be all inclusive, and shall be used only as a guide. This material is sold for research purposes only and is not required to appear on the TSCA inventory. It is not intended for food, drug, household, agricultural or cosmetic use. Its use must be supervised by a technically qualified individual experienced in handling potentially hazardous chemicals. Biotium shall not be held liable for any damage resulting from handling or contact with the above product. The safety data sheet is validated by Eric Torres Other A change (in proportion to the last essential change (first cipher in SDS version, see section 1)) is marked with a triangle. The information in this safety data sheet applies only to this specific product (mentioned in section 1) and is not necessarily correct for use with other chemicals/products. It is recommended to hand over this safety data sheet to the actual user of the product. Information in this safety data sheet cannot be used as a product specification. Country-language: CA-en 1X PBS SECTION 1: Identification 1.1. Product identifier Trade name 1X PBS Other names / Synonyms 99955: 1X PBS, 50 mL Product no. 99955 1.2. Relevant identified uses of the substance or mixture and uses advised against Relevant identified uses of the substance or mixture Use as laboratory reagent. For research use only. Not for food, drug, household, or cosmetic use. Restricted to professional and industrial use. Uses advised against Use as laboratory reagent. For research use only. Not for food, drug, household, or cosmetic use. 1.3. Details of the supplier of the safety data sheet Company and address Biotium, Inc. 46117 Landing Parkway CA 94538 Fremont USA T: +1 510-265-1027 Fax: +1 510-265-1352 http://www.biotium.com E-mail techsupport@biotium.com SDS date 2025-12-18 SDS Version 1.0 1.4. Emergency telephone number In an emergency call 911 Alberta / Northwestern Territories (PADIS): 1-800-332-1414 British Columbia (DPIC): 1-800-567-8911 Manitoba: 1-855-7POISON (1-855-776-4766) New Brunswick: 911 Nova Scotia / Prince Edward Island (IWK): 1-800-565-8161 Ontario (OPC): 1-800-268-9017 Québec (CAPQ): 1-800-463-5060 Saskatchewan (PADIS): 1-866-454-1212 Yukon Territory: (867) 393-8700 Transport emergenices: Call CANUTEC at 1-888-CAN-UTEC (226-8832), 613-996-6666 or *666 on a cellular phone (24 hours) See also section 4 “First aid measures”. SECTION 2: Hazard(s) identification 1X PBS 2.1. Classification of the substance or mixture Not classified as hazardous according to Hazardous Products Regulation SOR/2015-17 (as amended by SOR/2022- 272). 2.2. Label elements Hazard pictogram(s) Not applicable. Signal word Not applicable. Hazard statement(s) Precautionary statement(s) General Not applicable. Prevention Not applicable. Response Not applicable. Storage Not applicable. Disposal Not applicable. Hazardous substances Does not contain any substances required to report SECTION 3: Composition/Information on Ingredients 3.1. Substances Not applicable. This product is a mixture. 3.2. Mixtures Does not contain any substances required to report See full text of H-phrases in section 16. Occupational exposure limits are listed in section 8, if these are available. Other information - No ingredients present at concentrations classified as harmful to health or the environment. SECTION 4: First-aid measures 4.1. Description of first aid measures General information If breathing is irregular, drowsiness, loss of consciousness or cramps: Call 911 and give immediate treatment (first aid). Contact a doctor if in doubt about the injured person’s condition or if the symptoms persist. Never give an unconscious person water or other drink. Inhalation Upon breathing difficulties or irritation of the respiratory tract: Bring the person into fresh air and stay with him/her. Skin contact Remove contaminated clothing and shoes immediately. Ensure to wash exposed skin thoroughly with water and soap. Skin cleanser can be used. DO NOT use solvents or thinners. Eye contact If in eyes: Flush eyes with water or saline water (20-30 °C) for at least 5 minutes. Remove contact lenses. Seek medical assistance and continue flushing during transport. Ingestion 1X PBS If the person is conscious, rinse the mouth with water and stay with the person. Never give the person anything to drink. In case of malaise, seek medical advice immediately and bring the safety data sheet or label from the product. Do not induce vomiting, unless recommended by the doctor. Have the person lean forward with head down to avoid inhalation of or choking on vomited material. Burns Not applicable. 4.2. Most important symptoms and effects, both acute and delayed None known. 4.3. Indication of any immediate medical attention and special treatment needed Treat symptomatically. Information to medics Bring this safety data sheet or the label from this product. SECTION 5: Fire-fighting measures 5.1. Extinguishing media Suitable extinguishing media: Alcohol-resistant foam, carbon dioxide, powder, water mist. Unsuitable extinguishing media: Waterjets should not be used, since they can spread the fire. 5.2. Special hazards arising from the substance or mixture Fire will result in dense smoke. Exposure to combustion products may harm your health. Closed containers, which are exposed to fire, should be cooled with water. Do not allow fire-extinguishing water to enter the sewage system and nearby surface waters. 5.3. Advice for firefighters No specific requirements. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Ensure adequate ventilation, especially in confined areas. Contaminated areas may be slippery. 6.2. Environmental precautions Avoid discharge to lakes, streams, sewers, etc. Keep unauthorized persons away from the spill 6.3. Methods and material for containment and cleaning up Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations. Wherever possible cleaning should be performed with normal cleaning agents. Avoid use of solvents. 6.4. Reference to other sections See section 13 “Disposal considerations” on handling of waste. See section 8 "Exposure controls/personal protection" for protective measures. SECTION 7: Handling and storage 7.1. Precautions for safe handling Smoking, drinking and consumption of food is not allowed in the work area. See section 8 "Exposure controls/personal protection" for information on personal protection. 7.2. Conditions for safe storage, including any incompatibilities Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Recommended storage material Always store in containers of the same material as the original container. Storage conditions Refrigerator 2°C to 8°C. Keep container tightly closed in a dry and well-ventilated place. 1X PBS Incompatible materials Strong acids, strong bases, strong oxidizing agents, and strong reducing agents. 7.3. Specific end use(s) This product should only be used for applications quoted in section 1.2. SECTION 8: Exposure controls/personal protection 8.1. Control parameters No substances are listed in any provincial list of substances with an occupational exposure limit. 8.2. Exposure controls Compliance with the given occupational exposure limits values should be controlled on a regular basis. General recommendations Smoking, drinking and consumption of food is not allowed in the work area. Exposure scenarios There are no exposure scenarios implemented for this product. Exposure limits Professional users are subjected to the legally set maximum concentrations for occupational exposure. See occupational hygiene limit values above. Appropriate technical measures The formation of vapours must be kept at a minimum and below current limit values (see above). Installation of a local exhaust system if normal air flow in the work room is not sufficient is recommended. Ensure eyewash and emergency showers are clearly marked. Apply standard precautions during use of the product. Avoid inhalation of vapours. Hygiene measures In between use of the product and at the end of the working day all exposed areas of the body must be washed thoroughly. Pay special attention to hands, forearms and face. Measures to avoid environmental exposure No specific requirements. Individual protection measures, such as personal protective equipment Generally Use only protective equipment with a recognized certification mark, e.g. the UL mark. Respiratory Equipment Type Class Colour Standards Not required; except in N/A case of aerosol formation. Skin protection No specific requirements. Hand protection Material Glove thickness (mm) Breakthrough time Standards (min.) Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory 1X PBS Material Glove thickness (mm) Breakthrough time Standards (min.) practices. Wash and dry hands. Eye protection Type Standards Safety glasses with EN166 side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state Liquid Colour Clear Odour No data available. Odour threshold (ppm) No data available. pH 7.4 Density (g/cm³) No data available. Kinematic viscosity No data available. Particle characteristics Does not apply to liquids. Phase changes Melting point/Freezing point (°C) No data available. Softening point/range (°F) Does not apply to liquids. Boiling point (°C) No data available. Vapour pressure No data available. Relative vapour density No data available. Decomposition temperature (°C) No data available. Data on fire and explosion hazards Flash point (°C) No data available. Flammability (°C) No data available. 1X PBS Auto-ignition temperature (°C) No data available. Explosion limits (% v/v) No data available. Solubility Solubility in water No data available. n-octanol/water coefficient (LogKow) No data available. Solubility in fat (g/L) No data available. 9.2. Other information Other physical and chemical parameters No data available. Oxidizing properties No data available. SECTION 10: Stability and reactivity 10.1. Reactivity No data available. 10.2. Chemical stability The product is stable under the conditions, noted in section 7 “Handling and storage”. 10.3. Possibility of hazardous reactions None known. 10.4. Conditions to avoid Heat, flames and sparks. 10.5. Incompatible materials Strong acids, strong bases, strong oxidizing agents, and strong reducing agents. 10.6. Hazardous decomposition products Under normal conditions of storage and use, hazardous decomposition products should not be produced. SECTION 11: Toxicological information 11.1. Information on toxicological effects Acute toxicity Based on available data for the mixture, the classification criteria are not met. Skin corrosion/irritation Based on available data for the mixture, the classification criteria are not met. Serious eye damage/irritation Based on available data for the mixture, the classification criteria are not met. Respiratory sensitisation Based on available data for the mixture, the classification criteria are not met. Skin sensitisation Based on available data for the mixture, the classification criteria are not met. Germ cell mutagenicity Based on available data for the mixture, the classification criteria are not met. Carcinogenicity Based on available data for the mixture, the classification criteria are not met. Reproductive toxicity Based on available data for the mixture, the classification criteria are not met. STOT-single exposure Based on available data for the mixture, the classification criteria are not met. 1X PBS STOT-repeated exposure Based on available data for the mixture, the classification criteria are not met. Aspiration hazard Based on available data for the mixture, the classification criteria are not met. Long term effects None known. Other information None known. SECTION 12: Ecological information 12.1. Toxicity Based on available data for the mixture, the classification criteria are not met. 12.2. Persistence and degradability Based on available data for the mixture, the classification criteria are not met. 12.3. Bioaccumulative potential Based on available data for the mixture, the classification criteria are not met. 12.4. Mobility in soil No data available. 12.5. Results of PBT and vPvB assessment This mixture/product does not contain any substances known to fulfil the criteria for PBT and vPvB classification. 12.6. Other adverse effects None known. SECTION 13: Disposal considerations Waste treatment methods None of the components are listed Specific labelling Contaminated packing Packaging containing residues of the product must be disposed of similarly to the product. SECTION 14: Transport information 14.1 14.2 14.3 14.4 14.5 Other UN / ID UN proper shipping name Hazard class(es) PG* Env** informatio n: TDG - IMDG - IATA - * Packing group ** Environmental hazards Additional information Not dangerous goods according to TDG, IATA and IMDG. 14.6. Special precautions for user Not applicable. 14.7. Transport in bulk according to Annex II of Marpol and the IBC Code No data available. SECTION 15: Regulatory information 15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture 1X PBS 15.2. Canadian lists NDSL None of the components are listed DSL None of the components are listed 15.4. Restrictions for application Restricted to professional and industrial use. 15.5. Demands for specific education No specific requirements. Additional information Not applicable. 15.7. Chemical safety assessment No Sources Hazardous Products Regulation SOR/2015-17 (as amended by SOR/2022-272) SECTION 16: Other information The full text of identified uses as mentioned in section 1 None known. Abbreviations and acronyms ANSI = American National Standards Institute ATE = Acute Toxicity Estimate BCF = Bioconcentration Factor CAS = Chemical Abstracts Service DSL = Domestic Substances List GHS = Globally Harmonized System of Classification and Labelling of Chemicals HHNOC = Health Hazards Not Otherwise Classified IARC = International Agency for Research on Cancer IATA = International Air Transport Association IMDG = International Maritime Dangerous Goods LogPow = logarithm of the octanol/water partition coefficient MARPOL = International Convention for the Prevention of Pollution From Ships, 1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution) NDSL = Non-domestic substances list OECD = Organisation for Economic Co-operation and Development PBT = Persistent, Bioaccumulative and Toxic PHNOC = Physical Hazards Not Otherwise Classified RID = The Regulations concerning the International Carriage of Dangerous Goods by Rail SCL = A specific concentration limit. SOR = Statutory Orders and Regulations STEL = Short-term exposure limits STOT-RE = Specific Target Organ Toxicity - Repeated Exposure STOT-SE = Specific Target Organ Toxicity - Single Exposure TDG = Transportation of Dangerous Goods TWA = Time weighted average UN = United Nations UVBC = Unknown or variable composition, complex reaction products or of biological materials VOC = Volatile Organic Compound vPvB = Very Persistent and Very Bioaccumulative WHIMS = Workplace Hazardous Materials Information System Additional information Not applicable. The information provided above is believed to be correct to our best knowledge, but does not purport to be all inclusive, and shall be used only as a guide. This material is sold for research purposes only and is not required to appear on the TSCA inventory. It is not intended for food, drug, household, agricultural or cosmetic use. Its use must 1X PBS be supervised by a technically qualified individual experienced in handling potentially hazardous chemicals. Biotium shall not be held liable for any damage resulting from handling or contact with the above product. The safety data sheet is validated by Julianne Davis SDS date 2025-12-18 Other A change (in proportion to the last essential change (first cipher in SDS version, see section 1)) is marked with a triangle. The information in this safety data sheet applies only to this specific product (mentioned in section 1) and is not necessarily correct for use with other chemicals/products. It is recommended to hand over this safety data sheet to the actual user of the product. Information in this safety data sheet cannot be used as a product specification. Country-language: CA-en 1X PBS