TruGear FG 320

SECTION 2: Hazards identification

Precautionary statements

Oil soaked materials (rags, steel wool, clothing, etc.) should be placed in a sealed metal container to prevent spontaneous combustion (fire), The product contains no substances at their given concentration, that are considered hazardous to one’s health.

2.1 Classification of the substance or mixture

Not Applicable

2.3 Other hazards

None known Unknown Toxicity <1% of the mixture consists of ingredients with unknown toxicity

Hazard statements

Specific hazards that may develop when chemical burns Cool closed containers exposed to fire with water spray. Special firefighting Firefighters should use all standard protective equipment to fight fire. equipment/precautions Empty containers contain residue and/or vapors; do not weld, cut, pressurize, braze, solder, drill, grind or expose to heat, spark or flame. SECTION 6: ACCIDENTAL RELEASE MEASURES Personal precautions Use personal protective equipment and ensure adequate ventilation. Material can create slippery conditions. Emergency procedures in the event of a spill, evacuate non-essential personnel, remove any sources of ignition, ventilate spill area, and prevent entry into sewers and waterways. Pick up free material for recycle or disposal and absorb residual Hquid with inert material. Methods and material for containment Prevent further leakage or spillage if safe to do so. Soak up with inert absorbent material and remove any ignition sources. Use only non- sparking tools and ensure adequate ventilation. Notify the proper authorities. Cleanup procedures Dam up, then soak up with absorbent material. Use a dry spill kit or sand, and collect in appropriate containers before disposing according to all proper regulations. Clean contaminated surfaces thoroughly. SECTION 7: HANDLING AND STORAGE Precautions for safe handling Ensure adequate ventilation to prevent inhalation of vapor/dust or wear suitable respiratory equipment. Keep away from heat and sources of ignition. Avoid contact with skin, eyes and clothing. Do not smoke, eat or drink in application area. Storage recommen- Store in a dry, cool, well-ventilated area in original container. Carefully dations reseal opened containers and store upright to prevent leakage. To maintain product quality, do net store in heat or direct sunlight. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION Exposure Limits Contains no substances with occupational exposure limit values. Engineering controls No special ventilation requirements. Good general ventilation should be sufficient to control worker exposure to airborne contaminants. Recommended Personal Protective Equipment Eye/Face Protection lf exposure to airborne mist or splashing is possible, safety goggles or safety glasses with side shields are recommended. erature Viscosity @ 40°C, cSt 320 SECTION 10: STABILITY AND REACTIVITY Reactivity This product is stable and non-reactive under normal conditions of use, storage, handling and transportation. Stability This product is chemically stable under normai conditions of use, storage, handling and transportation. Possibility of hazard- Hazardous polymerization does not occur. ous reactions Conditions to avoid Not available Incompatible mater- ials Reactive with oxidizing agents. Hazardous decomp- osition products May release COx, smoke and irritating vapors when heated to decomposition.