Note: Ingredients listed on restricted chemical lists
General Information
Revision date
2021-02-20
Product name
UCAT/UMET Acidic Reagent
CAS No.
64-19-7
1.2.1 Relevant identified uses
In-vitro laboratory reagent or component
Emergency telephone
CHEMTREC USA: 1 (800) 424-9300
Icons in SDS
Company Information
company name
Bio-Rad Laboratories Inc
e-mail address of the competent person responsible for the Safety Data Sheet
TechSupport.USSD@bio-rad.com
GHS Information
Signal word
Danger
Section 2
2.1 Classification of the substance or mixture
This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Skin corrosion/irritation Category 1 Sub-category A Serious eye damage/eye irritation Category 1 Corrosive to metals Category 1 Flammable liquids Category 3
2.3 Other hazards
Not applicable
2.2 Label elements
Danger
Hazard statements
Causes severe skin burns and eye damage May be corrosive to metals Flammable liquid and vapor Appearance aqueous solution Physical state Liquid Odor Odorless
Prevention
Do not breathe dusts or mists. Wash face, hands and any exposed skin thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Keep only in original container.
Response
Immediately call a POISON CENTER or doctor. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing Immediately call a POISON CENTER or doctor Wash contaminated clothing before reuse. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER or doctor. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. In case of fire: Use CO2, dry chemical, or foam to extinguish Absorb spillage to prevent material damage
Storage
Store in a well-ventilated place. Keep cool
Precautionary statements
Disposal Dispose of contents/container to an approved waste disposal plant