Note: Ingredients listed on restricted chemical lists
EC/CAS
64742-48-9
Name of the chemical
Naphtha (petroleum), hydrotreated heavy
Concentration
N/A
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
EC/CAS
8052-41-3
Name of the chemical
Stoddard Solvent; Naphtha (petroleum), hydrodesulfurized heavy
Concentration
N/A
EC/CAS
96-29-7
Name of the chemical
2-Butanonoxim (2020/1182)
Concentration
N/A
General Information
Revision date
2015-10-22
Product name
SUPER SPEC HP URETHANE ALKYD GLOSS ENAMEL MEDIUM BASE
1.2.1 Relevant identified uses
SOLVENT THINNED PAINT
Manufacturer Name
Benjamin Moore & Co
Emergency telephone
Benjamin Moore & Co
Icons in SDS
Company Information
company name
Benjamin Moore & Co
GHS Information
Signal word
WARNING
Section 2
SECTION 2: Hazards identification
Emergency Overview WARNING Vapors may be irritating to eyes, nose, throat, and lungs. May cause skin irritation and/or dermatitis. May cause allergic skin reaction. Combustible material. Rags, steel wool or waste soaked with this product may spontaneously catch fire if improperly discarded. Appearance liquid Odor Not available
Principle Routes of Exposure
Eye contact, skin contact and inhalation. Acute Effects Eyes Contact with eyes may cause irritation. Skin May cause skin irritation. May cause allergic skin reaction. Inhalation May cause irritation of respiratory tract. Ingestion Ingestion may cause irritation to mucous membranes.
Potential chronic health
Avoid repeated exposure. See Section 11 for additional Toxicological information.
Medical Conditions Generally Aggravated by Exposure
None known HMIS - Health: 1* Flammability: 2 Reactivity: 0 PPE: - HMIS Legend 0 - Minimal Hazard 1 - Slight Hazard 2 - Moderate Hazard 3 - Serious Hazard 4 - Severe Hazard * - Chronic Hazard X - Consult your supervisor or S.O.P. for "Special" handling instructions. Note: The PPE rating has intentionally been left blank. Choose appropriate PPE that will protect employees from the hazards the material will present under the actual normal conditions of use. Caution: HMISÒ ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks. Although HMISÒ ratings are not required on MSDSs under 29 CFR 1910.1200, the preparer, has chosen to provide them. HMISÒ ratings are to be used only in conjunction with a fully implemented HMISÒ program by workers who have received appropriate HMISÒ training. HMISÒ is a registered trade and service mark of the NPCA. HMISÒ materials may be purchased exclusively from J. J. Keller (800) 327-6868.
