HP DTM MASTIC URETHANE SATIN - DEEP BASE

Benjamin Moore & Co., Limited

Revision date : 2023-08-28

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS08 GHS02
Health risk rating 5
Safety risk rating 2
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

13463-67-7

Name of the chemical

Reaction mass of titanium dioxide and silver chloride

Concentration

7-13%

EC/CAS

98-56-6

Name of the chemical

4-Chloro-alpha,alpha,alpha-trifluorotoluene

Concentration

7-13%

EC/CAS

123-86-4

Name of the chemical

acetic acid, butyl ester

Concentration

1-5%

EC/CAS

14808-60-7

Name of the chemical

Silica, crystalline

Concentration

0.1-0.25%

EC/CAS

100-41-4

Name of the chemical

Ethylbenzene

Concentration

0.1-0.25%

Listed in

EC/CAS

868-77-9

Name of the chemical

2-hydroxyethyl methacrylate

Concentration

0.1-0.25%

General Information

Revision date

2023-08-28

Product name

HP DTM MASTIC URETHANE SATIN - DEEP BASE

1.2.1 Relevant identified uses

Industrial paint

Manufacturer Name

Benjamin Moore & Co

Emergency telephone

+1 703-741-5970, 1-800-424-9300, +1 703-527-3887

Icons in SDS

GHS02 GHS07 GHS08 M004 M009 M010 M011 M017

Company Information

company name

Benjamin Moore & Co., Limited

Hazard Codes

Hazard statements (CLP)

H226, H315, H317, H319, H335, H340, H350

Hazard statements

Code

Statements

H226

Flammable liquid and vapour

Section 2

SECTION 2: Hazards identification

Classification This chemical is considered hazardous by the Hazardous Products Regulations (HPR: SOR/2015-17) Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2A Skin sensitization Category 1A Germ cell mutagenicity Category 1B Carcinogenicity Category 1A Specific target organ toxicity (single exposure) Category 3 Flammable liquids Category 3 Label elements Danger Hazard statements Causes skin irritation Causes serious eye irritation May cause an allergic skin reaction May cause genetic defects May cause cancer May cause respiratory irritation Flammable liquid and vapor Appearance liquid Odor solvent Precautionary Statements - Prevention Obtain special instructions before use Do not handle until all safety precautions have been read and understood Use personal protective equipment as required Wash face, hands and any exposed skin thoroughly after handling Avoid breathing dust/fume/gas/mist/vapors/spray Contaminated work clothing should not be allowed out of the workplace Use only outdoors or in a well-ventilated area Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking Keep container tightly closed Ground and bond container and receiving equipment Use only non-sparking tools Take action to prevent static discharges Keep cool Wear protective gloves/clothing and eye/face protection Precautionary Statements - Response IF exposed or concerned: Get medical advice/attention Eyes IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do Continue rinsing If eye irritation persists: Get medical advice/attention Skin If skin irritation or rash occurs: Get medical advice/attention IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower Wash contaminated clothing before reuse Inhalation IF INHALED: Remove person to fresh air and keep comfortable for breathing Fire In case of fire: Use CO2, dry chemical, or foam for extinction Precautionary Statements - Storage Store locked up Store in a well-ventilated place. Keep container tightly closed _____________________________________________________________________________________________

Precautionary statements

Disposal Dispose of contents/container to an approved waste disposal plant

Further information

No information available IMPORTANT: Designed to be mixed with other components. Mixture will have hazards of all components. Before opening packages, read all warning labels. Follow all precautions. CAUTION: All floor coatings may become slippery when wet. Where non-skid characteristics are desired, use an appropriate anti-slip aggregate.

2.1 Classification of the substance or mixture

This chemical is considered hazardous by the Hazardous Products Regulations (HPR: SOR/2015-17) Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2A Skin sensitization Category 1A Germ cell mutagenicity Category 1B Carcinogenicity Category 1A Specific target organ toxicity (single exposure) Category 3 Flammable liquids

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.