Note: Ingredients listed on restricted chemical lists
EC/CAS
25068-38-6
Name of the chemical
4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane
Concentration
30-60%
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
10-30%
EC/CAS
68609-97-2
Name of the chemical
Oxirane, mono[(C12-14-alkyloxy)methyl] derivs
Concentration
5-10%
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
3-7%
EC/CAS
84852-15-3
Name of the chemical
Nonylphenol (NP), mixed isomers
Concentration
1-5%
EC/CAS
1333-86-4
Name of the chemical
carbon black
Concentration
0.1-0.25%
General Information
Revision date
2025-04-14
Product name
HP 100% SOLIDS EPOXY - SILVER GRAY
1.2.1 Relevant identified uses
Paint
Manufacturer Name
Benjamin Moore & Co
Emergency telephone
+1 703-741-5970, 1-800-424-9300, +1 703-527-3887
Icons in SDS
Company Information
company name
Benjamin Moore & Co., Limited
Hazard Codes
Hazard statements (CLP)
H315, H317, H318, H336, H350, H361, H372
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
Classification This chemical is considered hazardous by the Hazardous Products Regulations (HPR: SOR/2015-17) Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 1 Skin sensitization Category 1 Carcinogenicity Category 1A Reproductive toxicity Category 2 Specific target organ toxicity (single exposure) Category 3 Specific target organ toxicity (repeated exposure) Category 1 Label elements Danger GRAY Hazard statements Causes skin irritation Causes serious eye damage May cause an allergic skin reaction May cause cancer Suspected of damaging fertility or the unborn child May cause drowsiness or dizziness Causes damage to organs through prolonged or repeated exposure Appearance liquid Odor little or no odor Precautionary Statements - Prevention Obtain special instructions before use Do not handle until all safety precautions have been read and understood Use personal protective equipment as required Wash face, hands and any exposed skin thoroughly after handling Contaminated work clothing should not be allowed out of the workplace Wear protective gloves Do not breathe dust/fume/gas/mist/vapors/spray Do not eat, drink or smoke when using this product Use only outdoors or in a well-ventilated area Precautionary Statements - Response IF exposed or concerned: Get medical advice/attention Eyes IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do Continue rinsing Immediately call a POISON CENTER or doctor/physician Skin IF ON SKIN: Wash with plenty of soap and water Take off contaminated clothing and wash before reuse If skin irritation or rash occurs: Get medical advice/attention Inhalation IF INHALED: Remove person to fresh air and keep comfortable for breathing Precautionary Statements - Storage Store locked up Store in a well-ventilated place. Keep container tightly closed
Precautionary statements
Disposal Dispose of contents/container to an approved waste disposal plant GRAY
Further information
No information available IMPORTANT: Designed to be mixed with other components. Mixture will have hazards of all components. Before opening packages, read all warning labels. Follow all precautions. CAUTION: All floor coatings may become slippery when wet. Where non-skid characteristics are desired, use an appropriate anti-slip aggregate.
2.1 Classification of the substance or mixture
This chemical is considered hazardous by the Hazardous Products Regulations (HPR: SOR/2015-17) Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 1 Skin sensitization Category 1 Carcinogenicity Category 1A Reproductive toxicity Category 2 Specific target organ toxicity (single exposure) Category 3 Specific target organ toxicity (repeated exposure)