COROTECH DTM MASTIC URETHANE GLOSS - DEEP BASE

Benjamin Moore & Co., Limited

Revision date : 2022-04-04

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS08 GHS02
Health risk rating 5
Safety risk rating 2
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

13463-67-7

Name of the chemical

Reaction mass of titanium dioxide and silver chloride

Concentration

10-30%

EC/CAS

123-86-4

Name of the chemical

acetic acid, butyl ester

Concentration

1-5%

EC/CAS

14808-60-7

Name of the chemical

Silica, crystalline

Concentration

0.25-0.5%

EC/CAS

100-41-4

Name of the chemical

Ethylbenzene

Concentration

0.1-0.25%

Listed in

EC/CAS

868-77-9

Name of the chemical

2-hydroxyethyl methacrylate

Concentration

0.1-0.25%

General Information

Revision date

2022-04-04

Product name

COROTECH DTM MASTIC URETHANE GLOSS - DEEP BASE

1.2.1 Relevant identified uses

Industrial paint

Manufacturer Name

Benjamin Moore & Co

Emergency telephone

+1 703-741-5970, 1-800-424-9300, +1 703-527-3887

Icons in SDS

GHS02 GHS07 GHS08 M004 M009 M010 M011 M017

Company Information

company name

Benjamin Moore & Co., Limited

Hazard Codes

Hazard statements (CLP)

H226, H317, H350

Hazard statements

Code

Statements

H226

Flammable liquid and vapour

Section 2

SECTION 2: Hazards identification

Classification This chemical is considered hazardous by the Hazardous Products Regulations (HPR: SOR/2015-17) Skin sensitization Category 1A Carcinogenicity Category 1A Flammable liquids Category 3 Label elements Danger Hazard statements May cause an allergic skin reaction May cause cancer Flammable liquid and vapor Appearance liquid Odor solvent Precautionary Statements - Prevention Obtain special instructions before use Do not handle until all safety precautions have been read and understood Use personal protective equipment as required Avoid breathing dust/fume/gas/mist/vapors/spray Contaminated work clothing should not be allowed out of the workplace Wear protective gloves Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking Keep container tightly closed Ground/bond container and receiving equipment Use explosion-proof electrical/ventilating/lighting/equipment Use only non-sparking tools Take precautionary measures against static discharge Precautionary Statements - Response IF exposed or concerned: Get medical advice/attention Skin If skin irritation or rash occurs: Get medical advice/attention Wash contaminated clothing before reuse IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower Fire In case of fire: Use CO2, dry chemical, or foam for extinction Precautionary Statements - Storage Store locked up Store in a well-ventilated place. Keep cool

Precautionary statements

Disposal Dispose of contents/container to an approved waste disposal plant

Further information

No information available IMPORTANT: Designed to be mixed with other components. Mixture will have hazards of all components. Before opening packages, read all warning labels. Follow all precautions. CAUTION: All floor coatings may become slippery when wet. Where non-skid characteristics are desired, use an appropriate anti-slip aggregate.

2.1 Classification of the substance or mixture

This chemical is considered hazardous by the Hazardous Products Regulations (HPR: SOR/2015-17) Skin sensitization Category 1A Carcinogenicity Category 1A Flammable liquids

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.