Note: Ingredients listed on restricted chemical lists
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
1-5% 1-5%
EC/CAS
1333-86-4
Name of the chemical
carbon black
Concentration
1-5%
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
0.1-0.25%
EC/CAS
868-77-9
Name of the chemical
2-hydroxyethyl methacrylate
Concentration
0.1-0.25%
General Information
Revision date
2022-04-04
Product name
COROTECH DTM MASTIC URETHANE GLOSS - BLACK
1.2.1 Relevant identified uses
Industrial paint
Manufacturer Name
Benjamin Moore & Co
Emergency telephone
+1 703-741-5970, 1-800-424-9300, +1 703-527-3887
Icons in SDS
Company Information
company name
Benjamin Moore & Co., Limited
Hazard Codes
Hazard statements (CLP)
H226, H317, H336, H350
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Classification This chemical is considered hazardous by the Hazardous Products Regulations (HPR: SOR/2015-17) Skin sensitization Category 1A Carcinogenicity Category 1A Specific target organ toxicity (single exposure) Category 3 Flammable liquids Category 3 Label elements Danger Hazard statements May cause an allergic skin reaction May cause cancer May cause drowsiness or dizziness Flammable liquid and vapor Appearance liquid Odor solvent Precautionary Statements - Prevention Obtain special instructions before use Do not handle until all safety precautions have been read and understood Use personal protective equipment as required Avoid breathing dust/fume/gas/mist/vapors/spray Contaminated work clothing should not be allowed out of the workplace Wear protective gloves Use only outdoors or in a well-ventilated area Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking Keep container tightly closed Ground/bond container and receiving equipment Use explosion-proof electrical/ventilating/lighting/equipment Use only non-sparking tools Take precautionary measures against static discharge Keep cool Precautionary Statements - Response IF exposed or concerned: Get medical advice/attention Skin If skin irritation or rash occurs: Get medical advice/attention Wash contaminated clothing before reuse IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower Inhalation IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing Fire In case of fire: Use CO2, dry chemical, or foam for extinction Precautionary Statements - Storage Store locked up Store in a well-ventilated place. Keep container tightly closed
Precautionary statements
Disposal Dispose of contents/container to an approved waste disposal plant
Further information
No information available IMPORTANT: Designed to be mixed with other components. Mixture will have hazards of all components. Before opening packages, read all warning labels. Follow all precautions. CAUTION: All floor coatings may become slippery when wet. Where non-skid characteristics are desired, use an appropriate anti-slip aggregate.
2.1 Classification of the substance or mixture
This chemical is considered hazardous by the Hazardous Products Regulations (HPR: SOR/2015-17) Skin sensitization Category 1A Carcinogenicity Category 1A Specific target organ toxicity (single exposure) Category 3 Flammable liquids