Note: Ingredients listed on restricted chemical lists
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
N/A
EC/CAS
868-77-9
Name of the chemical
2-hydroxyethyl methacrylate
Concentration
N/A
General Information
Revision date
2016-11-15
Product name
ALIPHATIC ACRYLIC URETHANE GLOSS CLEAR BASE
Manufacturer Name
Benjamin Moore & Co
Icons in SDS
Company Information
company name
Benjamin Moore & Co., Limited
GHS Information
Signal word
Danger
Section 2
2.1 Classification of the substance or mixture
This chemical is considered hazardous by the Hazardous Products Regulations (HPR: SOR/2015-17) Acute toxicity - Oral Category 4 Skin sensitization Category 1A Carcinogenicity Category 1B Specific target organ toxicity (single exposure) Category 3 Specific target organ toxicity (repeated exposure) Category 2 Flammable liquids Category 3
2.2 Label elements
Danger
Hazard statements
Harmful if swallowed May cause an allergic skin reaction May cause cancer May cause drowsiness or dizziness May cause damage to organs through prolonged or repeated exposure Flammable liquid and vapor Appearance liquid Odor solvent
Prevention
Obtain special instructions before use Do not handle until all safety precautions have been read and understood Use personal protective equipment as required Wash face, hands and any exposed skin thoroughly after handling Do not eat, drink or smoke when using this product Contaminated work clothing should not be allowed out of the workplace Wear protective gloves Do not breathe dust/fume/mist/vapors/spray Use only outdoors or in a well-ventilated area Keep away from heat/sparks/open flames/hot surfaces, no smoking Keep container tightly closed Ground/bond container and receiving equipment Use explosion-proof electrical/ventilating/lighting/equipment Use only non-sparking tools Take precautionary measures against static discharge Keep cool
Response
If exposed or concerned get medical attention Skin If skin irritation or rash occurs get medical attention Wash contaminated clothing before reuse If on skin (or hair) take off immediately all contaminated clothing. Rinse skin with water Inhalation If inhaled remove victim to fresh air and keep at rest in a position comfortable for breathing Ingestion If swallowed call a POISON CENTER or physician if you feel unwell Rinse mouth Fire In case of fire use CO2, dry chemical, or foam for extinction
Storage
Store locked up Store in a well-ventilated place. Keep container tightly closed
Precautionary statements
Disposal Dispose of contents/container to an approved waste disposal plant
Further information
No information available
2.3 Other hazards
IMPORTANT: Designed to be mixed with other components. Mixture will have hazards of all components. Before opening packages, read all warning labels. Follow all precautions. CAUTION: All floor coatings may become slippery when wet. Where non-skid characteristics are desired, a small amount of clean sand may be added. Stir often during application.