Note: Ingredients listed on restricted chemical lists
EC/CAS
8052-41-3
Name of the chemical
Stoddard Solvent; Naphtha (petroleum), hydrodesulfurized heavy
Concentration
40-70% 30-60%
EC/CAS
7631-86-9
Name of the chemical
Silver adsorbed on silicon dioxide
Concentration
3-7%
EC/CAS
96-29-7
Name of the chemical
2-Butanonoxim (2020/1182)
Concentration
0.1-0.25%
General Information
Revision date
2013-05-30
Product name
INTERIOR WOOD FINISH POLYURETHANE LOW LUSTRE
1.2.1 Relevant identified uses
SOLVENT THINNED PAINT
Manufacturer Name
Benjamin Moore & Co
Icons in SDS
Company Information
company name
Benjamin Moore & Co
GHS Information
Signal word
WARNING
Section 2
SECTION 2: Hazards identification
Emergency Overview WARNING Vapors may be irritating to eyes, nose, throat, and lungs. May cause skin irritation and/or dermatitis. May cause allergic skin reaction. Combustible material. Rags, steel wool or waste soaked with this product may spontaneously catch fire if improperly discarded. Appearance liquid Odor solvent
Principle Routes of Exposure
Eye contact, skin contact and inhalation. Acute Effects Eyes Contact with eyes may cause irritation. Skin May cause skin irritation and/or dermatitis. May cause allergic skin reaction. Inhalation High vapor / aerosol concentrations are irritating to the eyes, nose, throat and lungs and may cause headaches, dizziness, drowsiness, unconsciousness, and other central nervous system effects. Ingestion Ingestion may cause irritation to mucous membranes. Small amounts of this product aspirated into the respiratory system during ingestion or vomiting may cause mild to severe pulmonary injury, possibly progressing to death.
Potential chronic health
Avoid repeated exposure See Section 11 for additional Toxicological information.
Medical Conditions Generally Aggravated by Exposure
None known HMIS Health: 1 Flammability: 2 Reactivity: 0 PPE: - HMIS Legend 0 - Minimal Hazard 1 - Slight Hazard 2 - Moderate Hazard 3 - Serious Hazard 4 - Severe Hazard * - Chronic Hazard X - Consult your supervisor or S.O.P. for "Special" handling instructions. Note: The PPE rating has intentionally been left blank. Choose appropriate PPE that will protect employees from the hazards the material will present under the actual normal conditions of use. Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks. Although HMIS® ratings are not required on MSDSs under 29 CFR 1910.1200, the preparer, has chosen to provide them. HMIS® ratings are to be used only in conjunction with a fully implemented HMIS® program by workers who have received appropriate HMIS® training. HMIS® is a registered trade and service mark of the NPCA. HMIS® materials may be purchased exclusively from J. J. Keller (800) 327-6868.