Note: Ingredients listed on restricted chemical lists
EC/CAS
872-50-4
Name of the chemical
N-Methyl-2-Pyrrolidone; 1-methyl-2-pyrrolidone (NMP)
Concentration
N/A
EC/CAS
111-76-2
Name of the chemical
Ethylene glycol monobutyl ether (EGBE)
Concentration
N/A
General Information
Revision date
2011-12-21
Product name
ECHO 1 COMPONENT WATERBORNE FLOOR FINISH-GLOSS XP- 6387
1.2.1 Relevant identified uses
WATER THINNED PAINT
Manufacturer Name
Benjamin Moore & Co
Icons in SDS
Company Information
company name
Benjamin Moore & Co
Section 2
SECTION 2: Hazards identification
Emergency Overview Vapors may be irritating to eyes, nose, throat, and lungs. May cause skin irritation and/or dermatitis. CAUTION: All floor coatings may become slippery when wet. Where non-skid characteristics are desired, a small amount of clean sand may be added. Stir often during application. Appearance liquid Odor little or no odor
Principle Routes of Exposure
Eye contact, skin contact and inhalation. Acute Effects Eyes May cause slight irritation. Skin Substance may cause slight skin irritation. Inhalation May cause irritation of respiratory tract. Ingestion Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea.
Potential chronic health
Repeated contact may cause allergic reactions in very susceptible persons. See Section 11 for additional Toxicological information.
Medical Conditions Generally Aggravated by Exposure
None known HMIS Health: 1* Flammability: 0 Reactivity: 0 PPE: - HMIS Legend 0 - Minimal Hazard 1 - Slight Hazard 2 - Moderate Hazard 3 - Serious Hazard 4 - Severe Hazard * - Chronic Hazard X - Consult your supervisor or S.O.P. for "Special" handling instructions. Note: The PPE rating has intentionally been left blank. Choose appropriate PPE that will protect employees from the hazards the material will present under the actual normal conditions of use. Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks. Although HMIS® ratings are not required on MSDSs under