Note: Ingredients listed on restricted chemical lists
EC/CAS
202-859-9/100-51-6
Name of the chemical
Benzyl Alcohol
Concentration
10-30%
EC/CAS
220-666-8/2855-13-2
Name of the chemical
3-aminomethyl-3,5,5-trimethylcyclohexylamine
Concentration
5-10%
EC/CAS
231-545-4/7631-86-9
Name of the chemical
Silver adsorbed on silicon dioxide
Concentration
1-5%
General Information
Revision date
2011-10-13
Product name
BELZONA 1341 N (SUPERMETALGLIDE) BASE
1.2.1 Relevant identified uses
Base component of a two component system. Mix with Solidifier component before use. A drinking water approved coating system for improving the efficiency of fluid handling systems and protecting metals from the effects of erosion-corrosion. Application by stiff bristled brush or plastic applicator provided. May also be applied by spray. Please refer to the relevant Belzona® Instructions For Use for further information. For use only by professional operators
supplier name
Belzona Inc
Manufacturer Name
Belzona Polymerics Limited
Emergency telephone
800-424-9300, 1-703-527-3887
Icons in SDS
Company Information
company name
Belzona Polymerics Limited
e-mail address of the competent person responsible for the Safety Data Sheet
sds@belzona.com
Section 2
SECTION 2: Hazards identification
OSHA EMERGENCY OVERVIEW Blue. or Gray Thixotropic liquid. Amine odor. WARNING. May be harmful if swallowed or absorbed through the skin. May cause allergic skin reaction. A component of the product may affect the central nervous system. Combustible liquid - Class IIIB. Prevent the product from entering into soil, drains, sewers, ditches or waterways.
Potential health effects
INHALATION Vapors that may collect in the container headspace during transit or prolonged storage may be harmful if inhaled. Exposure to vapors may result in severe irritation of the mucous membrane and the respiratory system and adverse effects on the renal and central nervous systems. Inhalation of airborne droplets or aerosols may severely damage contacted tissue and produce scarring. INGESTION Ingestion is not normally an exposure risk arising from professional applications. Inadvertent ingestion of small amounts of this product through poor hygiene or cross contamination may cause irritation or burns of the mouth, throat and stomach. May be harmful if swallowed. SKIN CONTACT This product contains components that may be absorbed through the skin (see Section 11). May be harmful if absorbed through the skin. Release during high pressure use may result in injection of material into the skin causing local necrosis. EYE CONTACT Contact with eyes may cause severe irritation with corneal injury, which may result in permanent impairment of vision. Product vapor in low concentrations can cause tearing, conjunctivitis and corneal edema when absorbed into the tissue of the eye from the atmosphere.
Principle Routes of Exposure
Inhalation: Ingestion. Skin and/or eye contact. Injection. TARGET ORGANS Eyes Skin Central nervous system Respiratory system, lungs MEDICAL SYMPTOMS Inhalation of vapor, skin absorption and ingestion may result in symptoms of central nervous system depression, such as headache, drowsiness, nausea and vomiting. Extreme irritation of eyes and mucous membranes, including burning and tearing. Prolonged or repeated contact with the skin or mucous membrane may result in irritant symptoms such as redness, blistering or dermatitis. Onset of symptoms may be delayed. MEDICAL CONSIDERATIONS Skin contact constitutes a pronounced hazard. Persons with a history of skin sensitization problems should only be employed in processes in which this product is used under appropriate medical supervision. CARCINOGENICITY Not available for the mixture, however none of the components in concentrations of 0.1% or greater are listed as carcinogens according to
