beko Tackcon Superflex

beko GmbH

Revision date : 2020-09-24

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS08
Health risk rating 5
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

236-675-5/13463-67-7

Name of the chemical

Reaction mass of titanium dioxide and silver chloride

Concentration

<5

EC/CAS

215-138-9/1305-78-8

Name of the chemical

Calcium oxide

Concentration

<5

EC/CAS

202-966-0/101-68-8

Name of the chemical

4,4’-Methylenediphenyl diisocyanate

Concentration

<2

EC/CAS

215-168-2

Name of the chemical

Iron Oxide Red

Concentration

<5

EC/CAS

257-098-5

Name of the chemical

Iron Oxide Yellow

Concentration

<2

General Information

Version

1.05

Revision date

2020-09-24

Product name

beko Tackcon Superflex

1.2.1 Relevant identified uses

Sealant

Emergency telephone

+49 (0) 6131/19240

Icons in SDS

GHS08 M004 M009 M010 M017

Company Information

company name

beko GmbH

e-mail address of the competent person responsible for the Safety Data Sheet

info@beko-group.com

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H334

Hazard statements

Code

Statements

H334

May cause allergy or asthma symptoms or breathing difficulties if inhaled

Section 2

SECTION 2: Hazards identification

Regulation (EC) No. 1272/2008 Classification of the substance or mixture

Hazard pictograms

GHS08 (Health Hazard) | Ingredients: Ingredient CAS Nbr EC No. % by Wt 4,4'-methylenediphenyl diisocyanate 101-68-8 202-966-0 0.1 - < 1 Reaction mass of Bis(1,2,2,6,6-pentamethyl-4-piperidyl) 915-687-0 < 0.1 sebacate and Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate

Hazard statements

H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.

Prevention

P261A Avoid breathing vapours.

Response

P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTRE or doctor/physician. 31% of the mixture consists of components of unknown acute oral toxicity. 33% of the mixture consists of components of unknown acute dermal toxicity.

2.3 Other hazards

Persons previously sensitised to isocyanates may develop a cross-sensitisation reaction to other isocyanates.

2.1 Classification of the substance or mixture

CLP REGULATION (EC) No 1272/2008 The health and environmental classifications of this material have been derived using the calculation method, except in cases where test data are available or the physical form impacts classification. Classification(s) based on test data or physical form are noted below, if applicable. The eye damage/irritation classification is not applied based on test data. The skin sensitization classification is not applied based on test data. CLASSIFICATION: Respiratory Sensitization, Category 1 - Resp. Sens. 1; H334 For full text of H phrases, see Section 16.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.