General Information
Product name
Positive Control for Indole Test and Tryptophan Deaminase Test
1.2.1 Relevant identified uses
For In Vitro Diagnostic Use. See product literature for details
Manufacturer Name
EC REP Address
Emergency telephone
800-424-9300, 703-527-3887
Icons in SDS
Company Information
company name
Beckman Coulter, Inc
e-mail address of the competent person responsible for the Safety Data Sheet
SDSNT@beckman.com
Section 2
SECTION 2: Hazards identification
Identication 67/548/EEC Classication of substance or mixture
Product definition
Mixture Colorless; Clear; Liquid; Odorless
PBT Substances
Not applicable
vPvB Substances
Not applicable See Section 11 Toxicological Information for more detailed health information.
2.1 Classification of the substance or mixture
Product Description Mixture Colorless; Clear; Liquid; Odorless Classication according to EC 1272/2008 (CLP/GHS) Not classied as hazardous per EC 1272/2008 (CLP/GHS) Classication according to EC Directives 1999/45/EC and 67/548/EEC Not classied as dangerous per EC Directives (1999/45/EC and 67/548 EEC) Classication according to US-OSHA (HCS 29 CFR 1910.1200) and UN GHS Not classied as hazardous per US-OSHA HCS 2012 and UN GHS 2.2 Label Elements According to EC 1272/2008 (CLP/GHS), US-OSHA and UN GHS Not classied as hazardous per EC 1272/2008 (CLP/GHS) Section 2 Hazards Identication (Continued) 2.3 Other hazards Results of PBT and vPvB assessment PBT: Not applicable. vPvB: Not applicable. See Section 11 Toxicological Information for more detailed health information. Section 3 Composition and Information on Ingredients 3.2 Mixtures Hazardous Ingredients: None Section 4 First Aid Measures 4.1 Description of rst aid measures Inhalation If product is inhaled, move exposed individual to fresh air. If individual is not breathing, begin articial respiration immediately and obtain medical attention. Eye Contact If product enters eyes, wash eyes gently under running water for 15 minutes or longer, making sure that the eyelids are held open. If pain or irritation occur, obtain medical attention. Skin Contact In case of skin contact, ush with copious amounts of water for at least 15 minutes. If pain or irritation occur, obtain medical attention. Ingestion If ingested, wash mouth out with water. If irritation or discomfort occurs, seek medical attention. 4.2 Most important symptoms and effects, both acute and delayed No adverse symptoms or effects have been identied. 4.3 Indication of any immediate medical attention and special treatment needed No specic medical attention or treatment required. Section 5 Fire Fighting Measures Flammable Properties Nonammable aqueous solution. 5.1 Extinguishing Media In case of re use carbon dioxide (CO2), dry chemical, water spray or foam. For large res use extinguishing media suitable for surrounding re. 5.2 Special hazards arising from the substance or mixture Special Fire and Explosion Hazards No special hazards determined. Hazardous Combustion Products No combustion products posing signicant hazards are expected from this product (an aqueous solution). Section 5 Fire Fighting Measures (Continued) 5.3 Advice for re ghters Protective Equipment Self-contained breathing apparatus is recommended for reghters in all chemical re situations. 5.4 Additional information No further relevant information available. Section 6 Accidental Release Measures 6.1 Personal precautions, protective equipment and emergency procedures Personal Precautions No special precautions are necessary. Use good laboratory procedures. 6.2 Environmental Precautions Contain spill to prevent migration. Do not allow the undiluted product to enter sewers/surface or ground water. 6.3 Methods and material for containment and cleaning up Spill and Leak Procedures Absorb spilled material with an appropriate inert, non-ammable absorbent and dispose according to local regulations. 6.4 Reference to other sections Refer sections 8 and 13. Section 7 Handling and Storage 7.1 Precautions for safe handling No special precautions are necessary; use good laboratory procedures. 7.2 Conditions for safe storage, including any incompatibilities Store at 2 to 8°C , as directed on the product label. To maintain product quality, store according to the instructions in the product labeling. Store away from strong acids, strong bases, strong oxidizers and incompatible materials (section 10). 7.3 Specic end uses