Note: Ingredients listed on restricted chemical lists
EC/CAS
220-239-6](3:1/55965-84-9
Name of the chemical
Mixture of 5-chloro-2-methyl-2H- isothiazol-3-one (EINECS 247-500-7) and 2-methyl-2H-isothiazol-3-one (EINECS 220-239-6)
Concentration
<0.1
EC/CAS
247-852-1/26628-22-8
Name of the chemical
Sodium Azide
Concentration
28-32
EC/CAS
247-500-7
Name of the chemical
Mixture of 5-Chloro-2-methyl-isothiazol-3(2H)-one and 2-methylisothiazol-3(2H)-one
Concentration
25-34-
EC/CAS
220-239-6
Name of the chemical
Mixture of 5-Chloro-2-methyl-isothiazol-3(2H)-one and 2-methylisothiazol-3(2H)-one 2-Methyl-2H-isothiazol-3-one
Concentration
<0.1
General Information
Product name
Flow-Set Fluorospheres
1.2.1 Relevant identified uses
For In Vitro Diagnostic Use. See product literature for details
Manufacturer Name
EC REP Address
Emergency telephone
800-424-9300, 703-527-3887
Icons in SDS
Company Information
company name
Beckman Coulter, Inc
e-mail address of the competent person responsible for the Safety Data Sheet
SDSNT@beckman.com
GHS Information
Signal word
WARNING
Hazard Codes
Hazard statements (CLP)
H317
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
Identication 67/548/EEC Classication of substance or mixture
Product definition
Mixture Colorless to pink; Clear; Liquid; Odorless
Hazardous Ingredients
reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC# 247-500-7] and 2-methyl-4-isothiazolin-3-one [EC# 220-239-6](3:1)
Signal word
WARNING
Hazard statements
H317 May cause an allergic skin reaction.
Precautionary statements
P261 Avoid breathing vapours. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear protective gloves, protective clothing and eye/face protection. P302+P352 IF ON SKIN: Wash with plenty of soap and water. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P362+P364 Take off contaminated clothing and wash it before use. P501 Dispose of contents/container in accordance with local/national regulations Product label will display most signicant precautionary statements.
2.3 Other hazards
This product contains concentrations of azide below the hazardous level which with repeated contact with lead and copper commonly found in plumbing drains may result in the build up of shock sensitive compounds. Sodium azide forms explosive compounds with heavy metals.
PBT Substances
Not applicable
vPvB Substances
Not applicable See Section 11 Toxicological Information for more detailed health information.
2.1 Classification of the substance or mixture
Product Description Mixture Colorless to pink; Clear; Liquid; Odorless Classication according to EC 1272/2008 (CLP/GHS) Skin Sensitization Category 1 Classication according to EC Directives 1999/45/EC and 67/548/EEC Not classied as dangerous per EC Directives (1999/45/EC and 67/548 EEC) Classication according to US-OSHA (HCS 29 CFR 1910.1200) and UN GHS Not classied as hazardous per US-OSHA HCS 2012 and UN GHS Section 2 Hazards Identication (Continued)