Note: Ingredients listed on restricted chemical lists
EC/CAS
100-42-5
Name of the chemical
Styrene ( Vinyl benzene )
Concentration
N/A
General Information
Revision date
2007-02-07
Product name
PE340 CLEAR POLYESTER SEALER - PART “A”
1.2.1 Relevant identified uses
Unsaturated polyester sealer for use on timber
Icons in SDS
Company Information
company name
BC COATINGS
Section 2
SECTION 2: Hazards identification
Leaks of gas or spills of liquid can readily form flammable mixtures at temperatures at or above flash point. Hazardous according to criteria of Worksafe Australia CLASSIFICATION AND LABELLING ACCORDING TO NOHSC CODES
2.1 Classification of the substance or mixture
SYMBOL : HIGHLY FLAMABLE / F / SYMBOL : HARMFUL / Xn GOVERNING DIRECTIVE : National Code of practice for the Labelling of Hazardous Substances. LABEL NAME : Paint Related Material Leaks of gas or spills of liquid can readily form flammable mixtures at temperatures at or above flash point. R11 Highly flammable. R20/2122 Harmful by inhalation, in contact with skin and if swallowed. R36/37/38 Irritating to eyes, respiratory system and skin. R42/43 May cause sensitisation by inhalation and skin contact.
Precautionary statements
S7/9 Keep container tightly closed and in a well ventilated place. S16 Keep away from sources of ignition - No smoking. S20/21 When using, do not eat, drink or smoke. S23 Do not breathe gas/fumes/vapour/spray S25 Avoid contact with eyes. S29 Do not empty into drains. S33 Take precautionary measures against static discharges. S36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S43B In case of fire use sand, earth, chemical powder or alcohol type foam S51 Use only in well ventilated areas. 3. HAZARDS IDENTIFICATION (continued)
Potential health effects
ACUTE EXPOSURE SWALLOWED : Considered an unlikely route of entry in commercial/industrial environments. The liquid is highly irritating and may be harmful if swallowed. Tends to break into a foam if the patient vomits. Ingestion can result in nausea, cramps, pain, vomiting, diarrhoea and central nervous system depression. Small amounts of liquid aspirated into respiratory system during ingestion or from vomiting may cause broncho-pneumonia or pulmonary oedema may cause potentially lethal chemical pneumonitis.. If the victim is uncoordinated there is a greater likelihood of vomit entering the lungs and causing subsequent complications. If a large amount ( > 1 ml/kg) is ingested and retained, symptoms of CNS depression and irritation occur and include weakness, dizziness, unconsciousness and convulsions. EYE The liquid is highly irritating to the eyes and is capable of causing temporary discomfort with mild redness of the conjunctiva (similar to wind burn), temporary impairment of vision and other transient eye damage/ulceration. The vapour is highly irritating to the eyes. SKIN Contact with the skin may result in severe irritation and drying of the skin which may lead to dermatitis if contact is prolonged. Material is capable of being absorbed by the skin. Toxic effects may result from skin absorption. Capable of causing skin sensitisation and allergic skin reactions. Open cuts, abraded or irritated skin should not be exposed to this material. The material may accentuate any pre-existing skin condition. INHALED Vapor/mist concentrations above recommended exposure levels may be extremely irritating to mucous membranes, eyes, respiratory tract, and lungs and may cause headaches and dizziness, could be anaesthetic and may have other central nervous system effects. Inhalation hazard is increased at higher temperatures. Toxic effects are increased by consumption of alcohol. Repeated exposure may cause sensitisation and/or allergic reactions. If exposure to highly concentrated solvent atmosphere is prolonged this may lead to narcosis, unconsciousness, even coma and possible death. - CHRONIC EXPOSURE Principal routes of exposure are usually by skin contact/absorption and inhalation of vapour. Chronic (long term) health effects can occur at some time after exposure to liquid hydrocarbons and can last for months or years: Evidence from animal tests indicate that repeated or prolonged solvent inhalation exposures could result in kidney disorders, nervous system impairment, liver and blood changes. [PATTYS] Prolonged or continuous skin contact with the liquid may cause de-fatting with drying, cracking, irritation and dermatitis following. Capable of causing skin sensitisation and allergic skin reactions. MIXED EXPOSURES Because smoking can cause heart disease, as well as lung cancer, emphysema, and other respiratory problems, it may worsen respiratory conditions caused by chemical exposure. Even if you have smoked for a long time, stopping now will reduce your risk of developing health problems. Because more than light alcohol consumption can cause liver damage, drinking alcohol can increase the liver damage caused by liquid hydrocarbons. 4 .