Bambi Synthetic Compressor Oil

Classification system

The classification is according to the latest editions of the EU-lists, and extended by company and literature data.

2.2 Label elements

' Labelling according to EU guidelines: Observe the general safety regulations when handling chemicals. The product is not subject to identification regulations under EU Directives and the Ordinance on Hazardous Materials (German GefstoffV).

Special rules for supplemental label elements for certain mixtures

Contains 2-ethylhexyl l0-ethyl-4-[[2-f(2-ethylhexyl)oxy]-2-oxoethyllthiol-7-oxo-8-oxa-3,5-dithia-4- phosphatetradecanoate 4-oxide. May produce an allergic reaction.

PBT Substances

Not applicable

vPvB Substances

Not applicable ' Chemical characterization: Mixtures ' Description: A blend of synthetic esters with multifunctional additives.

Hazardous Ingredients

CAS: 83547-95-9 2-ethylhexyl l0-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyllthiol-7-oxo-8-oxa- 3,5 -dithia-4-phosphatetradecanoate 4-oxide ffi xi R38;ffixi Ra3;EffiN R51/s3 CAS: 80939-62-4 Amines, C11-C14-branched alkyl, monohexyl and dihexyl phopshates EINECS: 279-632-6 m xi R36/38;m N R51/s3 ) Printing date 04.01.2012 Revision: 04.01.2012 Trade name: Bambi Synthetic Compressor Oil (Contd. ofpage l)

Additional information

For the wording of the listed risk phrases refer to section 16 ' Description of first aid measures ' General information: No special measures required. ' After inhalation: Supply fresh air; consult doctor in case of complaints. ' After skin contact: Immediately wash with water and soap and rinse thoroughly. Ifskin irritation continues, consult a doctor. ' After eye contact: Check for and remove any contact lenses. Rinse opened eye for several minutes under running water. If sy,rnptoms persist, consult a doctor. 'After swallowing: Wash mouth out with water ' Information for doctor: Treat symptomatically and supportively. ' Most important symptoms and effects, both acute and delayed No fui1her relevant information available. ' Indication of any immediate medical attention and special treatment needed No further relevant information available. ' Extinguishing media ' Suitable extinguishing agents: CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions. ' For safety reasons unsuitable extinguishing agents: Water with full jet . Special hazards arising from the substance or mixture No further relevant information available. ' Advice for firefighters ' Protective equipment: Wear self-contained respiratory protective device. Wear fully protective suit. ' Personal precautions, protective equipment and emergency procedures Particular danger of slipping on leakedlspilled product. ' Environmental precautions: Do not allow to penetrate the ground/soil. Do not allow to enter sewers/ surface or ground water. ' Methods and material for containment and cleaning up: Send for recovery or disposal in suitable receptacles. Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). ' Reference to other sections No dangerous substances are released. See Section 7 for information on safe handling. See Section 8 for information on personal protection equipment. See Section 13 for disposal information. 'Handling: ' Precautions for safe handling No special measures required. ' Information about fire - and explosion protection: No special measures required. (Contd. on page 3) ) Pase 316 Printing date 04.01.2012 Revision: 04.01.2012 Trade name: Bambi Synthetic Compressor Oil (Contd. ofPage 2) ' Conditions for safe storage, including any incompatibilities The lists valid during the making were used as basis ' Exposure controls ' Personal protective equipment: Select PPE appropriate for the operations taking place taking into account the product properties. jGeneral protective and hygienic measures: Do not eat, drink, smoke or sniff while working. Do not carry product impregnated cleaning cloths in trouser pockets. ' Respiratory protection: Not required. 'Protection ofhands: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation ' Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance ofthe glove material can not be calculated in advance and has therefore to be checked prior to the application. ' Penetration time of glove material The exact break through time has to be found out by the manufacturer ofthe protective gloves and has to be observed. ' Eye protection: Goggles recommended during refilling ' Body protection: Protective work clothing Information on basic physical and chemical properties General Information Appearance: tr'orm: Colour: Odour: Odour threshold: Change in condition Melting point/Melting range Undetermined. Boiling point/Boiling range: Undetermined. ' Flash point: (Contd. on page 4) Printing date 04.0 1.2012 Revision: 04.01.2012 Trade name: Bambi Synthetic Compressor Oil (Contd. ofpage 3) F'lammability (solid, gaseous): Not applicable. Ignition temperature: >2500c Decomposition temperature: Not determined. Self-igniting: Product is not selfigniting. 'Danger of explosion: Product does not present an explosion hazard. Explosion limits: Lower: Not determined Upper: Not determined Vapour pressure: Not determined Density at20oC: 0.983 g/cm' Relative density Not determined. Vapour density Not determined. Evaporation rate Not determined. ' Solubitity in / Miscibility with water: Not miscible or difficult to mix. Segregation coefficient (n-octanoUwater): Not determined 'Viscosity: Dynamic: Not determined Kinematic at 40oC: 107 cSt Solvent content: Organic solvents: 0.0% voc (EC) 0.00 % Solids content: 99.4% , Other information No further relevant information available.

Storage

' Requirements to be met by storerooms and receptacles: Prevent any seepage into the ground. ' Information about storage in one common storage facility: Store away from oxidizing agents. ' Further information about storage conditions: None. ' Specific end use(s) No further relevant information available. ' Additional information about design of technical facilities: No further data; see item 7. ' Control parameters ' Ingredients with limit values that require monitoring at the workplace: The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.