Polypropylene

SECTION 2: Hazards identification

2.2 Label elements

▪

Signal word

Warning ▪

Hazard statements

If small particles are generated during further processing, handling or by other means, may form combustible dust concentrations in air. Acute Toxicity No additional information available.

Additional information

Keep container tightly closed and away from heat, hot surfaces, sparks, open flames and other ignition sources. Processing the polymer at high temperatures may form vapors that irritate the eyes and respiratory tract. No smoking. Prevent dust accumulation. Airborne clouds of fine dust may form explosive mixtures with air. Handling and/or processing of this material may generate a dust which can cause mechanical irritation of the eyes, skin, nose and throat. Spilled pellets may create a slipping hazard. Sweep up spillage and dispose of properly. DS & SDS - PP - Bapolene 4082NA - MARCH 2024 2

2.1 Classification of the substance or mixture

▪ Combustible Dust Label Elements ▪ Signal word (GHS-US): Warning ▪ Hazard Statement(s): If small particles are generated during further processing, handling or by other means, may form combustible dust concentrations in air. Acute Toxicity No additional information available. Additional Information Keep container tightly closed and away from heat, hot surfaces, sparks, open flames and other ignition sources. Processing the polymer at high temperatures may form vapors that irritate the eyes and respiratory tract. No smoking. Prevent dust accumulation. Airborne clouds of fine dust may form explosive mixtures with air. Handling and/or processing of this material may generate a dust which can cause mechanical irritation of the eyes, skin, nose and throat. Spilled pellets may create a slipping hazard. Sweep up spillage and dispose of properly. DS & SDS - PP - Bapolene 4082NA - MARCH 2024 2 SECTION 3 COMPOSITION / INFORMATION ON INGREDIENTS Substance: NA Mixture: Ingredient Name CAS # % Wt. 1-Propene, Homopolymer 9003-07-0 ≤ 100 Additives Proprietary/Trade Secret NA * Compositions are typical values not part of any specification(s). To the best of our knowledge, there are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health and require reporting in this section. SECTION 4 FIRST AID MEASURES Description of First Aid Measures Eye Contact Flush eyes with clean, cold, low-pressure running water for at least 15 minutes. Seek immediate medical attention. Skin Contact If molten material contacts skin, immediately flush skin with large amounts of cold water. No attempt should be made to peel polymer from the skin or to remove clothing attached with molten material. Thermal burns require immediate medical attention. Inhalation Remove victim to well-ventilated area. If not breathing, provide artificial respiration by trained personnel. If difficulty breathing, provide give oxygen and seek medical attention. Ingestion