Note: Ingredients listed on restricted chemical lists
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
N/A
EC/CAS
98-56-6
Name of the chemical
4-Chloro-alpha,alpha,alpha-trifluorotoluene
Concentration
N/A
EC/CAS
141-78-6
Name of the chemical
acetic acid, ethyl ester
Concentration
N/A
EC/CAS
1333-86-4
Name of the chemical
carbon black
Concentration
N/A
General Information
Revision date
2017-12-20
Product name
High Gloss Polyurethane - ANSI 61 Grey
Emergency telephone
(855) 274-5698
Icons in SDS
Company Information
company name
Axalta Coating Systems, LLC
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
GHS Classification This preparation is hazardous per the following GHS criteria
2.1 Classification of the substance or mixture
Flammable liquids Category 2 Skin sensitisation Category 1 Carcinogenicity Category 2 Target Organ Systemic Toxicant - Single exposure Category 3 Target Organ Systemic Toxicant - Repeated exposure Category 1
Signal word
Danger
Hazard statements
Highly flammable liquid and vapour. May cause an allergic skin reaction. May cause drowsiness or dizziness. Suspected of causing cancer. Causes damage to organs through prolonged or repeated exposure.
Precautionary statements
Obtain special instructions before use. Keep away from heat/sparks/open flames/hot surfaces. No smoking. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. c 2017 Axalta Coating Systems, LLC and all affiliates. All rights reserved. ⃝ Copies may be made only for those using Axalta Coating Systems products. 1 - 11 en/US IF ON SKIN: Wash with plenty of soap and water. IF ON SKIN (or hair): Remove/ Take off immediately all contaminated clothing. Rinse skin with water/ shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Specific treatment (see supplemental first aid instructions on this label). If skin irritation or rash occurs: Get medical advice/ attention. Wash contaminated clothing before reuse. Store in a well-ventilated place. Keep container tightly closed. Store locked up. Dispose of contents/container in accordance with local regulations.
Other hazards which do not result in classification
Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.
Ingredient(s) with unknown acute toxicity
15.9 %
