Note: Ingredients listed on restricted chemical lists
EC/CAS
64742-95-6
Name of the chemical
Solvent naphtha (petroleum), light arom
Concentration
4-15%
EC/CAS
90-72-2
Name of the chemical
2,4,6-tris(dimethylaminomethyl)phenol
Concentration
1-4%
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
1-4%
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
0.5%
EC/CAS
98-82-8
Name of the chemical
Cumol (2022/692)
Concentration
0.2%
General Information
Revision date
2016-01-29
Product name
High Gloss High Build Epoxy DTM Activator
1.2.1 Relevant identified uses
Hardener for professional use Axalta Coating Systems, LLC Applied Corporate Center 50 Applied Bank Boulevard, Suite 300 US Glen Mills, PA 19342
Emergency telephone
(800) 424-9300
Icons in SDS
Company Information
company name
Axalta Coating Systems, LLC
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H317, H318, H336, H341, H373
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
Signal word
Danger
Hazard statements
Suspected of causing genetic defects. Highly flammable liquid and vapour. May cause drowsiness or dizziness. May cause damage to organs through prolonged or repeated exposure. May cause an allergic skin reaction. Causes serious eye damage.
Precautionary statements
Obtain special instructions before use. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Use only outdoors or in a well-ventilated area. Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. Wear protective gloves/protective clothing/eye protection/face protection. Contaminated work clothing should not be allowed out of the workplace. IF ON SKIN (or hair): Remove/ Take off immediately all contaminated clothing. Rinse skin with water/ shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. c 2015 Axalta Coating Systems, LLC and all affiliates. All rights reserved. ⃝ en/US IF ON SKIN: Wash with plenty of soap and water. Specific treatment (see supplemental first aid instructions on this label). If skin irritation or rash occurs: Get medical advice/ attention. Wash contaminated clothing before reuse. Immediately call a POISON CENTER or doctor/ physician. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Store locked up. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents/container in accordance with local regulations.
Other hazards which do not result in classification
Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.
Ingredient(s) with unknown acute toxicity
0 %
2.1 Classification of the substance or mixture
Flammable liquids Category 2 Serious eye damage/eye irritation Category 1 Skin sensitisation Category 1 Germ cell mutagenicity Category 2 Target Organ Systemic Toxicant - Single exposure Category 3 Target Organ Systemic Toxicant - Repeated exposure Category 2 Endpoints which are “not classified”, “cannot classified” and “not applicable” are not shown.