Note: Ingredients listed on restricted chemical lists
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
7.8%
EC/CAS
108-10-1
Name of the chemical
4-methylpentan-2-one; isobutyl methyl ketone (MIBK)
Concentration
5.8%
EC/CAS
64742-95-6
Name of the chemical
Solvent naphtha (petroleum), light arom
Concentration
1-4%
EC/CAS
96-29-7
Name of the chemical
2-Butanonoxim (2020/1182)
Concentration
0.0-1.0%
General Information
Revision date
2016-01-29
Product name
High Gloss Alkyd DTM - Deep Base
1.2.1 Relevant identified uses
Coating for professional use Axalta Coating Systems, LLC Applied Corporate Center 50 Applied Bank Boulevard, Suite 300 US Glen Mills, PA 19342
Emergency telephone
(800) 424-9300
Icons in SDS
Company Information
company name
Axalta Coating Systems, LLC
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H226, H315, H317, H319, H335, H351, H373
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
Signal word
Warning
Hazard statements
Suspected of causing cancer. Flammable liquid and vapour. May cause respiratory irritation. May cause damage to organs through prolonged or repeated exposure. May cause an allergic skin reaction. Causes skin irritation. Causes serious eye irritation.
Precautionary statements
Obtain special instructions before use. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Use only outdoors or in a well-ventilated area. Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. Wear protective gloves/protective clothing/eye protection/face protection. Contaminated work clothing should not be allowed out of the workplace. IF ON SKIN (or hair): Remove/ Take off immediately all contaminated clothing. Rinse skin with water/ shower. c 2015 Axalta Coating Systems, LLC and all affiliates. All rights reserved. ⃝ en/US IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN: Wash with plenty of soap and water. Specific treatment (see supplemental first aid instructions on this label). If skin irritation or rash occurs: Get medical advice/ attention. Take off contaminated clothing and wash before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/ attention. Store locked up. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents/container in accordance with local regulations.
Other hazards which do not result in classification
Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.
Ingredient(s) with unknown acute toxicity
35.9 %
2.1 Classification of the substance or mixture
Flammable liquids Category 3 Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2A Skin sensitisation Category 1 Carcinogenicity Category 2 Target Organ Systemic Toxicant - Single exposure Category 3 Target Organ Systemic Toxicant - Repeated exposure Category 2 Endpoints which are “not classified”, “cannot classified” and “not applicable” are not shown.
